Effect of tip-geometry on contrast and spatial-resolution of the Near-Field Microwave Microscope
arXiv:cond-mat/0512559 · doi:10.1063/1.2234801
Abstract
The Near-Field Scanning Microwave Microscope (NSMM) can quantitatively image materials properties at length scales far shorter than the free space wavelength (λ). Here we report a study of the effect of tip-geometry on the NSMM signals. This particular NSMM utilizes scanning tunneling microscopy (STM) for distance-following control. We systematically examined many commercially available STM tips, and find them to have a conical structure on the macroscopic scale, with an embedded sphere (of radius rsphere) at the apex of the tip. The rsphere values used in the study ranged from 0.1 μm to 12.6 μm. Tips with larger rsphere show good signal contrast (as measured by the frequency shift (δf) signal between tunneling height and 2 μm away from the sample) with NSMM. For example, the tips with rsphere = 8 μm give signal contrast of 1000 kHz compared to 85 kHz with a tip of rsphere = 0.55 μm. However, large rsphere tips distort the topographic features acquired through STM. A theoretical model is used to understand the tip-to-sample interaction. The model quantitatively explains the measured change in quality factor (Q) as a function of height over bulk Copper and Silicon samples.
30 pages (includes 8 figure pages)
References in corpus (2)
Cited by in corpus (8)
- Modeling of a Cantilever-Based Near-Field Scanning Microwave Microscope
- Nanometer-Scale Materials Contrast Imaging with a Near-Field Microwave Microscope
- Local Dielectric Measurements of BaTiO3-CoFe2O4 Nano-composites Through Microwave Microscopy
- Local Measurement of Microwave Response with Local Tunneling Spectra Using Near Field Microwave Microscopy
- Microwave Microscope Studies of Trapped Vortex Dynamics in Superconductors
- Low-temperature-compatible tunneling-current-assisted scanning microwave microscope utilizing a rigid coaxial resonator
- Near-field microwave imaging of inhomogeneous KFeSe: separation of topographic and electric features
- Coplanar waveguide ground potentials imbalance as a source of useful signal in Near-Field Scanning Microwave Microscopy