Model Order Reduction of a Sliding Beam using a Global Basis: Formulation and Evaluation
arXiv:2607.11794
The paper introduces a global reduction basis for sliding beams, built from snapshot modal matrices and compressed via proper orthogonal decomposition, and demonstrates its integration into a constraint multibody framework with up to 90% computational speed‑up and less than 2% RMS displacement error.
Abstract
Model order reduction decreases the dimension of a mechanical system by introducing modal coordinates that retain important dynamic characteristics. Sliding beams, as found in telescopic structures, pose a fundamental challenge. Fixed modal coordinates fail to capture evolving system properties, and updating the modal basis during simulation causes modal coordinates to change meaning. The present work addresses this challenge by constructing a global reduction basis for a sliding beam. The global basis is constructed from snapshots in the form of modal matrices and compressed using proper orthogonal decomposition. Reduction is applied within a constraint multibody formalism with algebraically enforced constraints that permit continuous slider movement. The method is validated against an absolute nodal coordinate formulation of a sliding beam with a sliding joint. Different combinations of snapshot quantity and eigenmodes per snapshot are investigated and an error map is shown. A challenging test case involving a highly flexible beam subjected to time-dependent loading and slider movement demonstrates that the global reduction basis reduces computation time by approximately 90% while keeping the root-mean-square displacement error, introduced by the global reduction, below 2%.