Design, fabrication and characterization of kinetic-inductive force sensors for scanning probe applications

Abstract

We describe a transducer for low-temperature atomic force microscopy based on electromechanical coupling due to a strain-dependent kinetic inductance of a superconducting nanowire. The force sensor is a bending triangular plate (cantilever) whose deflection is measured via a shift in the resonant frequency of a high-Q superconducting microwave resonator at 4.5 GHz. We present design simulations including mechanical finite-element modeling of surface strain and electromagnetic simulations of meandering nanowires with large kinetic inductance. We discuss a lumped-element model of the force sensor and describe the role of an additional shunt inductance for tuning the coupling to the transmission line used to measure the microwave resonance. A detailed description of our fabrication is presented, including information about the process parameters used for each layer. We also discuss the fabrication of sharp tips on the cantilever using focused electron beam-induced deposition of platinum. Finally, we present measurements that characterize the spread of mechanical resonant frequency, the temperature dependence of the microwave resonance, and the sensor's operation as an electromechanical transducer of force.

15 pages, 10 figures, 1 table

References in corpus (11)

• Sideband Cooling Micromechanical Motion to the Quantum Ground State
• Nanomechanical motion measured with precision beyond the standard quantum limit
• Efficient and robust analysis of complex scattering data under noise in microwave resonators
• Force sensitivity of multilayer graphene optomechanical devices
• Optomechanical transduction of an integrated silicon cantilever probe using a microdisk resonator
• Ultrasensitive nano-optomechanical force sensor at dilution temperatures
• A near-ideal degenerate parametric amplifier
• Four-wave-cooling to the single phonon level in Kerr optomechanics
• Characterization of NbTiN films with thicknesses below 20 nm for low power kinetic inductance amplifiers
• "Noiseless" thermal noise measurement of atomic force microscopy cantilevers
• Kinetic Inductive Electromechanical Transduction for Nanoscale Force Sensing

Cited by in corpus (1)

• Temperature dependence of microwave losses in lumped-element resonators made from superconducting nanowires with high kinetic inductance