$2\cdot 10^{-13}$ fractional laser frequency stability with a 7-cm unequal-arm Mach-Zehnder interferometer

Abstract

To achieve sub-picometer sensitivities in the millihertz band, laser interferometric inertial sensors rely on some form of reduction of the laser frequency noise, typically by locking the laser to a stable frequency reference, such as the narrow-linewidth resonance of an ultra-stable optical cavity or an atomic or molecular transition. In this paper we report on a compact laser frequency stabilization technique based on an unequal-arm Mach-Zehnder interferometer that is sub-nanometer stable at $10\mu$Hz, sub-picometer at $0.5$mHz, and reaches a noise floor of $7\mathrm{fm}/\sqrt{\mathrm{Hz}}$ at 1 Hz. The interferometer is used in conjunction with a DC servo to stabilize the frequency of a laser down to a fractional instability below $4\times 10^{-13}$ at averaging times from 0.1 to 100 seconds. The technique offers a wide operating range, does not rely on complex lock acquisition procedures, and can be readily integrated as part of the optical bench in future gravity missions.

9 pages, 7 figures

References in corpus (11)

• GW170817: Observation of Gravitational Waves from a Binary Neutron Star Inspiral
• Advanced Virgo: a 2nd generation interferometric gravitational wave detector
• Advanced LIGO
• Sensitivity and Performance of the Advanced LIGO Detectors in the Third Observing Run
• On orbit performance of the GRACE Follow-On Laser Ranging Interferometer
• Review of the Advanced LIGO gravitational wave observatories leading to observing run four
• Sensors and Actuators for the Advanced LIGO Mirror Suspensions
• LISA Pathfinder Platform Stability and Drag-free Performance
• Laser-Frequency Stabilization via a Quasimonolithic Mach-Zehnder Interferometer with Arms of Unequal Length and Balanced dc Readout
• Fiber-based two-wavelength heterodyne laser interferometer
• Quasi-monolithic heterodyne laser interferometer for inertial sensing