Laser-Frequency Stabilization via a Quasimonolithic Mach-Zehnder Interferometer with Arms of Unequal Length and Balanced dc Readout

Abstract

Low frequency high precision laser interferometry is subject to excess laser-frequency-noise coupling via arm-length differences which is commonly mitigated by locking the frequency to a stable reference system. This approach is crucial to achieve picometer level sensitivities in the 0.1 mHz to 1 Hz regime, where laser frequency noise is usually high and couples into the measurement phase via arm-length mismatches in the interferometers. Here we describe the results achieved by frequency stabilising an external cavity diode laser to a quasi-monolithic unequal arm-length Mach-Zehnder interferometer read out at mid-fringe via balanced detection. We find this stabilization scheme to be an elegant solution combining a minimal number of optical components, no additional laser modulations and relatively low frequency noise levels. The Mach-Zehnder interferometer has been designed and constructed to minimize the influence of thermal couplings and to reduce undesired stray light using the optical simulation tool ifocad. We achieve frequency-noise levels below 100 Hz/$\sqrt{\text{Hz}}$ at 1 Hz and are able to demonstrate the LISA frequency prestabilization requirement of 300 Hz/$\sqrt{\text{Hz}}$ down to frequencies of 100 mHz by beating the stabilized laser with an iodine-locked reference.

arXiv comment6 pages, 6 figures, published in Phyiscal Review Applied

References in corpus (4)

• Observation of Gravitational Waves from a Binary Black Hole Merger
• A sub-40 mHz linewidth laser based on a silicon single-crystal optical cavity
• Time-Delay Interferometry
• Readout for intersatellite laser interferometry: Measuring low frequency phase fluctuations of HF signals with microradian precision

Cited by in corpus (7)

• Compact Michelson interferometers with subpicometer sensitivity
• Compact multi-fringe interferometry with sub-picometer precision
• Active platform stabilisation with a 6D seismometer
• Single-element dual-interferometer for precision inertial sensing
• $2\cdot 10^{-13}$ fractional laser frequency stability with a 7-cm unequal-arm Mach-Zehnder interferometer
• Demonstration of $3.5\times 10^{-13}$ laser frequency stability at 1000 s using an iodine-filled hollow-core fiber photonic microcell
• Reducing suspension control noise with interferometric sensors -- an experimental concept