Baseband control of superconducting qubits with shared microwave drives

Abstract

Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical source could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. More importantly, the flexibility of baseband flux control could be employed for addressing the non-uniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.

16 pages, 16 figures

References in corpus (15)

• Supplementary information for "Quantum supremacy using a programmable superconducting processor"
• Charge insensitive qubit design derived from the Cooper pair box
• Surface codes: Towards practical large-scale quantum computation
• Simple pulses for elimination of leakage in weakly nonlinear qubits
• Approaching Unit Visibility for Control of a Superconducting Qubit with Dispersive Readout
• Fidelity of quantum operations
• Measurement and Control of Quasiparticle Dynamics in a Superconducting Qubit
• Electrically controlling single spin qubits in a continuous microwave field
• Non-Poissonian Quantum Jumps of a Fluxonium Qubit due to Quasiparticle Excitations
• Scalable superconducting qubit circuits using dressed states
• Wirebond crosstalk and cavity modes in large chip mounts for superconducting qubits
• Microwave Package Design for Superconducting Quantum Processors
• Conditional control of donor nuclear spins in silicon using Stark shifts
• Tunable coupling of widely separated superconducting qubits: A possible application towards a modular quantum device
• Combating fluctuations in relaxation times of fixed-frequency transmon qubits with microwave-dressed states

Cited by in corpus (4)

• Quasi-Perfect State Transfer in Spin Chains via Parametrization of On-Site Energies
• Selective Excitation of Superconducting Qubits with a Shared Control Line through Pulse Shaping
• Application of Optimal Control to Time-Resolution Protocol for Quantum Sensing
• Orthogonal frequency-division multiplexing for simultaneous gate operations on multiple qubits via a shared control line