Broadband multi-layer anti-reflection coatings with mullite and duroid for half-wave plates and alumina filters for CMB polarimetry

Abstract

A broadband two-layer anti-reflection (AR) coating was developed for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for cosmic microwave background (CMB) polarimetry. Measuring tiny CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. However, a sapphire HWP and an alumina IR filter have high refractive indices of about 3.1, and an AR coating must be applied to them. Thermally sprayed mullite and Duroid 5880LZ were selected in terms of index and coefficient of thermal expansion for use at cryogenic temperatures. With these materials, the reflectivity was reduced to about 2% at 90/150 GHz and <1% at 220/280 GHz. The design, fabrication, and optical performance evaluation of the AR coatings are described. The coatings were used in a current ground-based CMB experiment called the Simons Array. They could also be applied to next-generation CMB experiments, such as the Simons Observatory.

arXiv comment7 pages, 4 figures

References in corpus (7)

• A Probe of Primordial Gravity Waves and Vorticity
• CMB-S4 Science Case, Reference Design, and Project Plan
• Direct Signature of Evolving Gravitational Potential from Cosmic Microwave Background
• The Simons Observatory: gain, bandpass and polarization-angle calibration requirements for B-mode searches
• Epoxy-based broadband anti-reflection coating for millimeter-wave optics
• Small Aperture Telescopes for the Simons Observatory
• Two-layer anti-reflection coating with mullite and polyimide foam for large-diameter cryogenic infrared filters

Cited by in corpus (2)

• The Simons Observatory: Development and Optical Evaluation of Achromatic Half-Wave Plates
• Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics