Stable and compact RF-to-optical link using lithium niobate on insulator waveguides

Abstract

Optical frequency combs have become a very powerful tool in metrology and beyond thanks to their ability to link radio frequencies with optical frequencies via a process known as self-referencing. Typical self-referencing is accomplished in two steps: the generation of an octave-spanning supercontinuum spectrum and the frequency-doubling of one part of that spectrum. Traditionally, these two steps have been performed by two separate optical components. With the advent of photonic integrated circuits, the combination of these two steps has become possible in a single small and monolithic chip. One photonic integrated circuit platform very well suited for on-chip self-referencing is lithium niobate on insulator - a platform characterised by high second and third order nonlinearities. Here we show that combining a lithium niobate on insulator waveguide with a silicon photodiode results in a very compact and direct low-noise path towards self-referencing of mode-locked lasers. Using digital servo electronics the resulting frequency comb is fully stabilized. Its high degree of stability is verified with an independent out-of-loop measurement and is quantified to be 6.8 mHz. Furthermore, we show that the spectrum generated inside the lithium niobate waveguide remains stable over many hours.

References in corpus (24)

• Array Programming with NumPy
• Integrated photonics on thin-film lithium niobate
• Broadband electro-optic frequency comb generation in an integrated microring resonator
• An Integrated-Photonics Optical-Frequency Synthesizer
• Photonic chip based optical frequency comb using soliton induced Cherenkov radiation
• Monolithic Ultrahigh-Q Lithium Niobate Microring Resonator
• Monolithic photonic circuits for Kerr frequency comb generation, filtering and modulation
• Octave-spanning dissipative Kerr soliton frequency combs in $S{i}_3{N}_4$ microresonators
• Low-loss fiber-to-chip interface for lithium niobate photonic integrated circuits
• Towards 1% single photon nonlinearity with periodically-poled lithium niobate microring resonators
• Self-referencing of an on-chip soliton Kerr frequency comb without external broadening
• Coherent two-octave-spanning supercontinuum generation in lithium-niobate waveguides
• III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing
• An on-chip tunable micro-disk laser fabricated on Er3+ doped lithium niobate on insulator (LNOI)
• Ultrabroadband supercontinuum generation and frequency-comb stabilization using on-chip waveguides with both cubic and quadratic nonlinearities
• Self-organized nonlinear gratings for ultrafast nanophotonics
• Mitigating photorefractive effect in thin-filmlithium niobate microring resonators
• Counting the Cycles of Light using a Self-Referenced Optical Microresonator
• An electro-optically tunable microring laser monolithically integrated on lithium niobate on insulator
• Supercontinuum generation in varying-dispersion and birefringent silicon waveguide
• Beyond 100 THz-spanning ultraviolet frequency combs in a non-centrosymmetric crystalline waveguide
• An open and flexible digital phase-locked loop for optical metrology
• Hybrid InP and SiN integration of an octave-spanning frequency comb
• Visible blue-to-red 10 GHz frequency comb via on-chip triple-sum frequency generation

Cited by in corpus (5)

• Phase-stabilised self-injection-locked microcomb
• Ultraviolet astronomical spectrograph calibration with laser frequency combs from nanophotonic lithium niobate waveguides
• Supporting quantum technologies with an ultra-low loss silicon photonics platform
• Supercontinua from integrated gallium nitride waveguides
• Spectral dynamics in broadband frequency combs with overlapping harmonics