Slow Light Frequency Reference Cavities -- Proof of Concept for Reducing the Frequency Sensitivity Due to Length Fluctuations

Abstract

Length changes due to thermo-mechanical noise originating from, for example, Brownian motion are a key limiting factor of present day state-of-the-art laser frequency stabilization using Fabry-Pérot cavities. We present a laser-frequency stabilization concept using an optical cavity with a strong slow-light effect to reduce the impact of cavity length changes on the frequency stability. The resulting noise-reduction factor is proportional to the ratio between the light phase and group velocities in the highly dispersive cavity spacer. We experimentally demonstrate a proof-of-principle implementation of this laser-frequency stabilization technique using a rare-earth doped crystalline cavity spacer in conjunction with semi-permanent spectral tailoring to achieve precise control of the dispersive properties of the cavity. Compared to the same setup in the absence of the slow-light effect a reduction in frequency sensitivity of four orders of magnitude was achieved.

arXiv commentPublished version, 24 pages, 7 figures

References in corpus (23)

• Observation of Gravitational Waves from a Binary Black Hole Merger
• A sub-40 mHz linewidth laser based on a silicon single-crystal optical cavity
• 1.5 $\mu$m lasers with sub 10 mHz linewidth
• Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization
• Compact, thermal-noise-limited optical cavity for diode laser stabilization at 1 x 10-15
• Sub-Hz line width diode lasers by stabilization to vibrationally and thermally compensated ULE Fabry-Perot cavities
• 8E-17 fractional laser frequency instability with a long room-temperature cavity
• Advanced holeburning techniques for determination of hyperfine transition properties in inhomogeneously broadened solids applied to Pr3+:Y2SiO5
• Frequency-stabilization to 6x10^-16 via spectral-hole burning
• Realization of a monolithic high-reflectivity cavity mirror from a single silicon crystal
• A Cold-Strontium Laser in the Superradiant Crossover Regime
• Optical spectrum analyzer with quantum limited noise floor
• A compact, robust, and transportable ultra-stable laser with a fractional frequency instability of $1\times 10^{-15}$
• Laser frequency stabilization based on steady-state spectral-hole burning in Eu${}^{3+}$:Y${}_2$SiO${}_5$
• Spectral Engineering of Slow Light, Cavity Line Narrowing, and Pulse Compression
• Reducing the effect of thermal noise in optical cavities
• Shifts of optical frequency references based on spectral-hole burning in Eu:Y2SiO5
• Non-linear Spectroscopy of Sr Atoms in an Optical Cavity for Laser Stabilization
• Spectrally narrow, long-term stable optical frequency reference based on a Eu${}^{3+}$:Y${}_2$SiO${}_5$ crystal at cryogenic temperature
• Absolute and relative stability of an optical frequency reference based on spectral hole burning in Eu${}^{3+}$:Y${}_2$SiO${}_5$
• Spectral hole burning for stopping light
• Characteristics of long-lived persistent spectral holes in $E{u}^{3+}:Y_{2}Si{O}_5$ at $1.2K$
• Double-heterodyne probing for ultra-stable laser based on spectral hole burning in a rare-earth doped crystal

Cited by in corpus (1)

• Microscopic model of spin flip-flop processes in rare-earth-ion-doped crystals