Interface controlled thermal properties of ultra-thin chalcogenide-based phase change memory devices

Abstract

Phase change memory (PCM) is a rapidly growing technology that not only offers advancements in storage-class memories but also enables in-memory data storage and processing towards overcoming the von Neumann bottleneck. In PCMs, the primary mechanism for data storage is thermal excitation. However, there is a limited body of research regarding the thermal properties of PCMs at length scales close to the memory cell dimension and, thus, the impact of interfaces on PCM operation is unknown. Our work presents a new paradigm to manage thermal transport in memory cells by manipulating the interfacial thermal resistance between the phase change unit and the electrodes without incorporating additional insulating layers. Experimental measurements show a substantial change in thermal boundary resistance as GST transitions from one crystallographic structure (cubic) to another (hexagonal) and as the thickness of tungsten contacts is reduced from five to two nanometers. Simulations reveal that interfacial resistance between the phase change unit and its adjacent layer can reduce the reset current for 20 and 120 nm diameter devices by up to ~40% and ~50%, respectively. The resultant phase-dependent and geometric effects on thermal boundary resistance dictate that the effective thermal conductivity of the phase change unit can be reduced by a factor of four, presenting a new opportunity to reduce operating currents in PCMs.

References in corpus (2)

• Competing covalent and ionic bonding in Ge-Sb-Te phase change materials
• X-ray magnetic linear dichroism as a probe for non-collinear magnetic state in ferrimagnetic single layer exchange bias systems

Cited by in corpus (8)

• Anharmonic phonon-phonon scattering at interface by non-equilibrium Green's function formalism
• Uncovering Thermal and Electrical Properties of Sb2Te3/GeTe Superlattice Films
• Thermal conductivity measurements of sub-surface buried substrates by steady-state thermoreflectance
• Ultrafast evanescent heat transfer across solid interfaces via hyperbolic phonon polaritons in hexagonal boron nitride
• Phase Change Memory by GeSbTe Electrodeposition in Crossbar Arrays
• Toward accurate thermal modeling of phase change material based photonic devices
• Evaluating the transport properties of interface-type, analog memristors
• Disorder controlled sound speed and thermal conductivity of hybrid metalcone films