Metals by micro-scale additive manufacturing: comparison of microstructure and mechanical properties

Abstract

Many emerging applications in microscale engineering rely on the fabrication of three-dimensional architectures in inorganic materials. Small-scale additive manufacturing (AM) aspires to provide flexible and facile access to these geometries. Yet, the synthesis of device-grade inorganic materials is still a key challenge towards the implementation of AM in microfabrication. Here, we present a comprehensive overview of the microstructural and mechanical properties of metals fabricated by most state-of-the-art AM methods that offer a spatial resolution $\le$10$\mu$m. Standardized sets of samples were studied by cross-sectional electron microscopy, nanoindentation and microcompression. We show that current microscale AM techniques synthesize metals with a wide range of microstructures and elastic and plastic properties, including materials of dense and crystalline microstructure with excellent mechanical properties that compare well to those of thin-film nanocrystalline materials. The large variation in materials performance can be related to the individual microstructure, which in turn is coupled to the various physico-chemical principles exploited by the different printing methods. The study provides practical guidelines for users of small-scale additive methods and establishes a baseline for the future optimization of the properties of printed metallic objects $-$ a significant step towards the potential establishment of AM techniques in microfabrication.

References in corpus (5)

• Past Achievements and Future Challenges in 3D Photonic Metamaterials
• Focused electron beam induced deposition meets materials science
• Metals by micro-scale additive manufacturing: comparison of microstructure and mechanical properties
• Printable Nanoscopic Metamaterial Absorbers and Images with Diffraction-Limited Resolution
• Dose and energy dependence of mechanical properties of focused electron beam induced pillar deposits from Cu(C5HF6O2)2

Cited by in corpus (4)

• Metals by micro-scale additive manufacturing: comparison of microstructure and mechanical properties
• Electrochemical 3D Printing of Silver and Nickel Microstructures with FluidFM
• Anomalous High Strain Rate Compressive Behavior of Additively Manufactured Copper Micropillars
• Direct in- and out-of-plane writing of metals on insulators by electron-beam-enabled, confined electrodeposition with submicrometer feature size