The short wavelength instrument for the polarization explorer balloon-borne experiment: Polarization modulation issues

Abstract

In this paper we investigate the impact of using a polarization modulator in the Short Wavelenght Instrument for the Polarization Explorer (SWIPE) of the Large Scale Polarization Explorer (LSPE). The experiment is optimized to measure the linear polarization of the Cosmic Microwave Background at large angular scales during a circumpolar long-duration stratospheric balloon mission, and uses multi-mode bolometers cooled at 0.3 K. The 330 detectors cover 3 bands at 140 GHz, 220 GHz and 240 GHz. Polarimetry is achieved by means of a large rotating half-wave plate (HWP) and a single wire-grid polarizer in front of the arrays. The polarization modulator is the first polarization-active component of the optical chain, reducing significantly the effect of instrumental polarization. A trade-off study comparing stepped vs spinning HWPs drives the choice towards the second. Modulating the CMB polarization signal at 4 times the spin frequency moves it away from $1/f$ noise from the detectors and the residual atmosphere. The HWP is cooled at 1.6 K to reduce the background on the detectors. Furthermore its polarized emission combined with the emission of the polarizer produces spurious signals modulated at $2f$ and $4f$. The $4f$ component is synchronous with the signal of interest and has to characterized to be removed from cosmological data.

Proceeding of IWARA 2018

References in corpus (1)

• Optimal strategy for polarization modulation in the LSPE-SWIPE experiment

Cited by in corpus (5)

• Transition Edge Sensors: Physics and Applications
• Progress report on the Large Scale Polarization Explorer
• Systematic effects induced by Half Wave Plate precession into Cosmic Microwave Background polarization measurements
• Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission
• Total power horn-coupled 150 GHz LEKID array for space applications