High aspect ratio silicon structures by Displacement Talbot lithography and Bosch etching

Abstract

Despite the fact that the resolution of conventional contact/proximity lithography can reach feature sizes down to ~0.5-0.6 micrometers, the accurate control of the linewidth and uniformity becomes already very challenging for gratings with periods in the range of 1-2 μm. This is particularly relevant for the exposure of large areas and wafers thinner than 300μm. If the wafer or mask surface is not fully flat due to any kind of defects, such as bowing/warpage or remaining topography of the surface in case of overlay exposures, noticeable linewidth variations or complete failure of lithography step will occur. We utilized the newly developed Displacement Talbot lithography to pattern gratings with equal lines and spaces and periods in the range of 1.0 to 2.4 μm. The exposures in this lithography process do not require contact between the mask and the wafer, which makes it essentially insensitive to surface planarity and enables exposures with very high linewidth uniformity on thin and even slightly deformed wafers. We demonstrated pattern transfer of such exposures into Si substrates by reactive ion etching using the Bosch process. An etching depth of 30 μm or more for the whole range of periods was achieved, which corresponds to very high aspect ratios up to 60:1. The application of the fabricated gratings in phase contrast x-ray imaging is presented.

Cited by in corpus (4)

• Towards Sub-micrometer High Aspect Ratio X-ray Gratings by Atomic Layer Deposition of Iridium
• Hot embossing of Au- and Pb- based alloys for X ray grating fabrication
• The Micro Solar Flare Apparutus (MiSolFA) Instrument Concept
• Talbot photolithography optimization with engineered hybrid metal-dielectric mask: High-contrast and highly-uniform Talbot stripes