First Measurements of Beam Backgrounds at SuperKEKB
arXiv:1802.01366 · doi:10.1016/j.nima.2018.05.071
Abstract
The high design luminosity of the SuperKEKB electron-positron collider is expected to result in challenging levels of beam-induced backgrounds in the interaction region. Properly simulating and mitigating these backgrounds is critical to the success of the Belle~II experiment. We report on measurements performed with a suite of dedicated beam background detectors, collectively known as BEAST II, during the so-called Phase 1 commissioning run of SuperKEKB in 2016, which involved operation of both the high energy ring (HER) of 7 GeV electrons as well as the low energy ring (LER) of 4 GeV positrons. We describe the BEAST II detector systems, the simulation of beam backgrounds, and the measurements performed. The measurements include standard ones of dose rates versus accelerator conditions, and more novel investigations, such as bunch-by-bunch measurements of injection backgrounds and measurements sensitive to the energy spectrum and angular distribution of fast neutrons. We observe beam-gas, Touschek, beam-dust, and injection backgrounds. We do not observe significant synchrotron radiation, as expected. Measured LER beam-gas backgrounds and Touschek backgrounds in both rings are slightly elevated, on average three times larger than the levels predicted by simulation. HER beam-gas backgrounds are on on average two orders of magnitude larger than predicted. Systematic uncertainties and channel-to-channel variations are large, so that these excesses constitute only 1-2 sigma level effects. Neutron background rates are higher than predicted and should be studied further. We will measure the remaining beam background processes, due to colliding beams, in the imminent commissioning Phase 2. These backgrounds are expected to be the most critical for Belle II, to the point of necessitating replacement of detector components during the Phase 3 (full-luminosity) operation of SuperKEB.
arXiv comment101 pages, 127 figures
References in corpus (7)
- Uniformity Studies of Scintillator Tiles directly coupled to SiPMs for Imaging Calorimetry
- Observation of Vertical Betatron Sideband due to Electron Clouds in the KEKB LER
- A scintillator based muon and KLong detector for the Belle II experiment
- 3-D Tracking of Nuclear Recoils in a Miniature Time Projection Chamber
- The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
- Compact, directional neutron detectors capable of high-resolution nuclear recoil imaging
- T3B - An Experiment to measure the Time Structure of Hadronic Showers
Cited by in corpus (33)
- Silicon Photomultipliers in Particle and Nuclear Physics
- Track Finding at Belle II
- The Design, Construction, Operation and Performance of the Belle II Silicon Vertex Detector
- Measurement of the integrated luminosity of the Phase 2 data of the Belle II experiment
- EUDAQ A Data Acquisition Software Framework for Common Beam Telescopes
- Performance of the diamond-based beam-loss monitor system of Belle II
- A fast simulation package for STCF detector
- Measured and projected beam backgrounds in the Belle II experiment at the SuperKEKB collider
- Measurements of Beam Backgrounds in SuperKEKB Phase 2
- Measurement of the integrated luminosity of data samples collected during 2019-2022 by the Belle II experiment
- Search for a light CP-odd Higgs boson and low-mass dark matter at the Belle experiment
- Compact, directional neutron detectors capable of high-resolution nuclear recoil imaging
- Improved simulation of beam backgrounds and collimation at SuperKEKB
- New graph-neural-network flavor tagger for Belle II and measurement of in decays
- Effects of gamma irradiation on DEPFET pixel sensors for the Belle II experiment
- A time resolved study of injection backgrounds during the first commissioning phase of SuperKEKB
- Measurement of the cross section in the energy range 0.62-3.50 GeV at Belle II
- Beam Background Simulation and Experiment at BEPCII
- First 3D vector tracking of helium recoils for fast neutron measurements at SuperKEKB
- Measurement of asymmetries and branching-fraction ratios for and with using Belle and Belle II data
- Application of recoil-imaging time projection chambers to directional neutron background measurements in the SuperKEKB accelerator tunnel
- Measurement of the time-integrated CP asymmetry in decays using Belle and Belle II data
- Primary track recovery in high-definition gas time projection chambers
- Operation of a double-sided CMOS pixelated detector at a high intensity particle collider
- Observation of time-dependent violation and measurement of the branching fraction of decays
- A neural network for beam background decomposition in Belle II at SuperKEKB
- Diamond detectors for radiation monitoring and beam abort at Belle II
- Model-independent measurement of - mixing parameters in decays at Belle and Belle II
- Combined analysis of Belle and Belle II data to determine the CKM angle using decays
- -flavor tagging at Belle II
- Measurement of the branching fraction, polarization, and time-dependent asymmetry in decays and constraint on the CKM angle
- Measurement of time-dependent asymmetries in decays at Belle and Belle II
- Status of Belle II experiment before the first beams