The role of grain dynamics in determining the onset of sediment transport

Abstract

Sediment transport occurs when the nondimensional fluid shear stress $\Theta$ at the bed surface exceeds a minimum value ${\Theta }_c$. A large collection of data, known as the Shields curve, shows that ${\Theta }_c$ is primarily a function of the shear Reynolds number ${\mathrm{Re}}_{\ast }$. It is commonly assumed that $\Theta >{\Theta }_c({\mathrm{Re}}_{\ast })$ occurs when the ${\mathrm{Re}}_{\ast }$-dependent fluid forces are too large to maintain static equilibrium for a typical surface grain. A complimentary approach, which remains relatively unexplored, is to identify ${\Theta }_c({\mathrm{Re}}_{\ast })$ as the applied shear stress at which grains cannot stop moving. With respect to grain dynamics, ${\mathrm{Re}}_{\ast }$ can be viewed as the viscous time scale for a grain to equilibrate to the fluid flow divided by the typical time for the fluid force to accelerate a grain over the characteristic bed roughness. We performed simulations of granular beds sheared by a model fluid, varying only these two time scales. We find that the critical Shields number ${\Theta }_c({\mathrm{Re}}_{\ast })$ obtained from the model mimics the Shields curve and is insensitive to the grain properties, the model fluid flow, and the form of the drag law. Quantitative discrepancies between the model results and the Shields curve are consistent with previous calculations of lift forces at varying ${\mathrm{Re}}_{\ast }$. Grains at low ${\mathrm{Re}}_{\ast }$ find more stable configurations than those at high ${\mathrm{Re}}_{\ast }$ due to differences in the grain reorganization dynamics. Thus, instead of focusing on mechanical equilibrium of a typical grain at the bed surface, ${\Theta }_c({\mathrm{Re}}_{\ast })$ may be better described by the stress at which mobile grains cannot find a stable configuration and stop moving.

to appear in Phys. Rev. Fluids

References in corpus (3)

• Understanding the Frequency Distribution of Mechanically Stable Disk Packings
• Can the packing efficiency of binary hard spheres explain the glass-forming ability of bulk metallic glasses?
• Critical shear rate and torque stability condition for a particle resting on a surface in a fluid flow

Cited by in corpus (12)

• The physics of sediment transport initiation, cessation, and entrainment across aeolian and fluvial environments
• Unification of Aeolian and Fluvial Sediment Transport Rate from Granular Physics
• Interface-resolved direct numerical simulations of sediment transport in a turbulent oscillatory boundary layer
• The Cessation Threshold of Nonsuspended Sediment Transport Across Aeolian and Fluvial Environments
• Critical scaling near the yielding transition in granular media
• Fluid forces or impacts: What governs the entrainment of soil particles in sediment transport mediated by a Newtonian fluid?
• Universal friction law at granular solid-gas transition explains scaling of sediment transport load with excess fluid shear stress
• Competitive dynamics of two erosion patterns around a cylinder
• Determining the Onset of Hydrodynamic Erosion in Turbulent Flow
• Frictional weakening of vibrated granular flows
• Comment on "Distinct Thresholds for the Initiation and Cessation of Aeolian Saltation From Field Measurements" by Raleigh L. Martin and Jasper F. Kok: Alternative Interpretation of Measured Thresholds as two Distinct Cessation Thresholds
• Addressing bedload flux variability due to grain shape effects and experimental channel geometry