Numerical simulation of turbulent sediment transport, from bed load to saltation
arXiv:1111.6898 · doi:10.1063/1.4757662
Abstract
Sediment transport is studied as a function of the grain to fluid density ratio using two phase numerical sim- ulations based on a discrete element method (DEM) for particles coupled to a continuum Reynolds averaged description of hydrodynamics. At a density ratio close to unity (typically under water), vertical velocities are so small that sediment transport occurs in a thin layer at the surface of the static bed, and is called bed load. Steady, or 'saturated' transport is reached when the fluid borne shear stress at the interface between the mobile grains and the static grains is reduced to its threshold value. The number of grains transported per unit surface is therefore limited by the flux of horizontal momentum towards the surface. However, the fluid velocity in the transport layer remains almost undisturbed so that the mean grain velocity scales with the shear velocity u\ast. At large density ratio (typically in air), the vertical velocities are large enough to make the transport layer wide and dilute. Sediment transport is then called saltation. In this case, particles are able to eject others when they collide with the granular bed, a process called splash. The number of grains transported per unit surface is selected by the balance between erosion and deposition and saturation is reached when one grain is statistically replaced by exactly one grain after a collision, which has the consequence that the mean grain velocity remains independent of u\ast. The influence of the density ratio is systematically studied to reveal the transition between these two transport regimes. Based on the mechanisms identified in the steady case, we discuss the transient of saturation of sediment transport and in particular the saturation time and length. Finally, we investigate the exchange of particles between the mobile and static phases and we determine the exchange time of particles.
17 pages, 14 figures, submitted to Physics of Fluids
References in corpus (6)
- Heavy particle concentration in turbulence at dissipative and inertial scales
- A scaling law for aeolian dunes on Mars, Venus, Earth, and for subaqueous ripples
- Difference in the wind speeds required for initiation versus continuation of sand transport on Mars: Implications for dunes and dust storms
- Minimal size of a barchan dune
- Jump at the onset of saltation
- Reply to "Comment on `Minimal size of a barchan dune' "
Cited by in corpus (42)
- SediFoam: A general-purpose, open-source CFD-DEM solver for particle-laden flow with emphasis on sediment transport
- The physics of sediment transport initiation, cessation, and entrainment across aeolian and fluvial environments
- River-bed armoring as a granular segregation phenomenon
- A unified model of ripples and dunes in water and planetary environments
- Formation of sediment patterns in channel flow: minimal unstable systems and their temporal evolution
- Direct numerical simulations of aeolian sand ripples
- Unification of Aeolian and Fluvial Sediment Transport Rate from Granular Physics
- Dense granular flow rheology in turbulent bedload transport
- A two-phase flow model of sediment transport: transition from bedload to suspended load
- Flux saturation length of sediment transport
- Giant ripples on comet 67P/Churyumov-Gerasimenko sculpted by sunset thermal wind
- CFD-DEM Simulations of Current-Induced Dune Formation and Morphological Evolution
- Rheology of sediment transported by a laminar flow
- A minimal coupled fluid-discrete element model for bedload transport
- The Cessation Threshold of Nonsuspended Sediment Transport Across Aeolian and Fluvial Environments
- A lower-than-expected saltation threshold at Martian pressure and below
- Local Rheology Relation with Variable Yield Stress Ratio across Dry, Wet, Dense, and Dilute Granular Flows
- Analytical model for flux saturation in sediment transport
- Revisiting slope influence in turbulent bedload transport: consequences for vertical flow structure and transport rate scaling
- Fluid forces or impacts: What governs the entrainment of soil particles in sediment transport mediated by a Newtonian fluid?
- Discrete Element Method simulations of the saturation of aeolian sand transport
- Incipient bedforms in a bidirectional wind regime
- Universal friction law at granular solid-gas transition explains scaling of sediment transport load with excess fluid shear stress
- The role of grain dynamics in determining the onset of sediment transport
- Particle resolved simulation of sediment transport by a hybrid parallel approach
- Analytical mesoscale modeling of aeolian sand transport
- Determining the Onset of Hydrodynamic Erosion in Turbulent Flow
- Fluid-particle interaction regimes during the evolution of turbidity currents from a coupled LES/DEM model
- Mobility of bidisperse mixtures during bedload transport
- Erosion of cohesive grains by an impinging turbulent jet
- The fluctuation energy balance in non-suspended fluid-mediated particle transport
- Single-dopant band bending fluctuations in MoSe measured with electrostatic force microscopy
- Anomalous Scaling of Aeolian Sand Transport Reveals Coupling to Bed Rheology
- Scaling laws for planetary sediment transport from DEM-RANS numerical simulations
- Large Effects of Particle Size Heterogeneity on Dynamic Saltation Threshold
- Emergence of wind ripples controlled by mechanics of grain-bed impacts
- From lab to landscape-scale experiments for the morphodynamics of sand dunes
- Modeling the dynamics of aeolian meter-scale bedforms induced by bed heterogeneities
- Unified model of sediment transport threshold and rate across weak and intense subaqueous bedload, windblown sand, and windblown snow
- The bar instability revisited
- Wind-invariant saltation heights imply linear scaling of aeolian saltation flux with shear stress
- Addressing bedload flux variability due to grain shape effects and experimental channel geometry