Autonomous take-off and landing of a tethered aircraft: a simulation study
arXiv:1510.01088 · doi:10.1109/ACC.2016.7525562
Abstract
The problem of autonomous launch and landing of a tethered rigid aircraft for airborne wind energy generation is addressed. The system operates with ground-based power conversion and pumping cycles, where the tether is repeatedly reeled in and out of a winch installed on the ground and linked to an electric motor/generator. In order to accelerate the aircraft to take-off speed, the ground station is augmented with a linear motion system composed by a slide translating on rails and controlled by a second motor. An onboard propeller is used to sustain the forward velocity during the ascend of the aircraft. During landing, a slight tension on the line is kept, while the onboard control surfaces are used to align the aircraft with the rails and to land again on them. A model-based, decentralized control approach is proposed, capable to carry out a full cycle of launch, low-tension flight, and landing again on the rails. The derived controller is tested via numerical simulations with a realistic dynamical model of the system, in presence of different wind speeds and turbulence, and its performance in terms of landing accuracy is assessed. This study is part of a project aimed to experimentally verify the launch and landing approach on a small-scale prototype.
arXiv commentThis is the longer version of a paper submitted to the 2016 American Control Conference 2016, with more details on the simulation parameters
References in corpus (6)
- Automatic crosswind flight of tethered wings for airborne wind energy: modeling, control design and experimental results
- Flight control of tethered kites in autonomous pumping cycles for airborne wind energy
- Real-time Optimization and Adaptation of the Crosswind Flight of Tethered Wings for Airborne Wind Energy
- On sensor fusion for airborne wind energy systems
- Design of a small-scale prototype for research in airborne wind energy
- Autonomous take-off and landing of a tethered aircraft: a simulation study