Enhanced Optomechanical Levitation of Minimally Supported Dielectrics

Abstract

Optically levitated mechanical sensors promise isolation from thermal noise far beyond what is possible using flexible materials alone. One way to access this potential is to apply a strong optical trap to a minimally supported mechanical element, thereby increasing its quality factor $Q_m$. Current schemes, however, require prohibitively high laser power ($\sim 10$ W), and the $Q_m$ enhancement is ultimately limited to a factor of $\sim$ 50 by hybridization between the trapped mode and the dissipative modes of the supporting structure. Here we propose a levitation scheme taking full advantage of an optical resonator to reduce the circulating power requirements by many orders of magnitude. Applying this scheme to the case of a dielectric disk in a Fabry-Perot cavity, we find a tilt-based tuning mechanism for optimizing both center-of-mass and torsional mode traps. Notably, the two modes are trapped with comparable efficiency, and we estimate that a 10-micron-diameter, 100-nm-thick Si disc could be trapped to a frequency of $\sim$ 10 MHz with only $30$ mW circulating in a cavity of (modest) finesse 1500. Finally, we simulate the effect such a strong trap would have on a realistic doubly-tethered disc. Of central importance, we find torsional motion is comparatively immune to $Q_m$-limiting hybridization, allowing a $Q_m$ enhancement factor of $\sim$ 1500. This opens the possibility of realizing a laser-tuned 10 MHz mechanical system with a quality factor of order a billion.

arXiv comment10 pages, 6 figures

References in corpus (38)

• Cavity Optomechanics
• Laser cooling of a nanomechanical oscillator into its quantum ground state
• Sideband Cooling Micromechanical Motion to the Quantum Ground State
• Strong dispersive coupling of a high finesse cavity to a micromechanical membrane
• Bidirectional and efficient conversion between microwave and optical light
• Cavity Optomechanics
• Cavity optomechanics using an optically levitated nanosphere
• Coherent optical wavelength conversion via cavity-optomechanics
• Opto-mechanical transducers for long-distance quantum communication
• Using interference for high fidelity quantum state transfer in optomechanics
• Toward Quantum Superposition of Living Organisms
• Strong Optomechanical Squeezing of Light
• Strong and Tunable Nonlinear Optomechanical Coupling in a Low-Loss System
• Observation of Radiation Pressure Shot Noise on a Macroscopic Object
• Measurement of the quantum zero-point motion of a nanomechanical resonator
• Dispersive optomechanics: a membrane inside a cavity
• An all-optical trap for a gram-scale mirror
• Proposal for an Optomechanical Traveling Wave Phonon-Photon Translator
• Cavity cooling of an optically levitated nanoparticle
• Enhanced quantum nonlinearities in a two mode optomechanical system
• Optomechanical trapping and cooling of partially transparent mirrors
• From Cavity Electromechanics to Cavity Optomechanics
• Optical wavelength conversion of quantum states with optomechanics
• Electromagnetically induced transparency and wide-band wavelength conversion in silicon nitride microdisk optomechanical resonators
• Fiber-Cavity-Based Optomechanical Device
• Standard Quantum Limit for Probing Mechanical Energy Quantization
• Observation of generalized optomechanical coupling and cooling on cavity resonance
• Observation of nitrogen vacancy photoluminescence from an optically levitated nanodiamond
• Multimode optomechanical dynamics in a cavity with avoided crossings
• The photon shuttle: Landau-Zener-Stueckelberg dynamics in an optomechanical system
• Nonlinear mode-coupling and synchronization of a vacuum-trapped nanoparticle
• Tunable linear and quadratic optomechanical coupling for a tilted membrane within an optical cavity: theory and experiment
• Enhancement of mechanical Q-factors by optical trapping
• High-reflectivity, high-Q micromechanical membranes via guided resonances for enhanced optomechanical coupling
• Towards all-optical optomechanics: An optical spring mirror
• Anomalous dynamic back-action in interferometers
• Mechanically Compliant Grating Reflectors for Optomechanics
• From membrane-in-the-middle to mirror-in-the-middle with a high-reflectivity sub-wavelength grating

Cited by in corpus (9)

• Ultralow-Noise SiN Trampoline Resonators for Sensing and Optomechanics
• Cavity-assisted manipulation of freely rotating silicon nanorods in high vacuum
• Decoherence as a way to measure extremely soft collisions with dark matter
• Flexure-Tuned Membrane-at-the-Edge Optomechanical System
• Negative dispersion medium at 1064 nm in an optomechanical resonator for enhancing the sensitivity bandwidth in a gravitational-wave detector
• Asymmetry-Based Quantum Backaction Suppression in Quadratic Optomechanics
• Optically Defined Mechanical Geometry
• Quantum gears from planar rotors
• Parametric amplification of light in a cavity with a moving dielectric membrane: Landau-Zener problem for the Maxwell field