Atomic resolution STM in a cryogen free dilution refrigerator at 15 mK

Abstract

Pulse tube refrigerators are becoming more common, because they are cost efficient and demand less handling than conventional (wet) refrigerators. However, a downside of a pulse tube system is the vibration level at the cold-head, which is in most designs several micrometers. We implemented vibration isolation techniques which significantly reduced vibration levels at the experiment. These optimizations were necessary for the vibration sensitive Magnetic Resonance Force Microscopy experiments (MRFM) at milli-kelvin temperatures for which the cryostat is intended. With these modifications we show atomic resolution STM on graphite. This is promising for scanning probe microscopy applications at very low temperatures.

6 pages, 10 figures and 1 video 1st revision: added label a and b to figures 2 and 3 typo at page 5 at the end of section 4 (Results): replaced 10^-10 m/sqrt(Hz) to 10^-12 m/sqrt(Hz) (contact [email protected] for the calculation)

Cited by in corpus (22)

• Vibrations on pulse tube based Dry Dilution Refrigerators for low noise measurements
• Vibration-induced electrical noise in a cryogen-free dilution refrigerator: characterization, mitigation, and impact on qubit coherence
• Vibration isolation with high thermal conductance for a cryogen-free dilution refrigerator
• Prospects for observing gravitational forces between nonclassical mechanical oscillators
• Vibration decoupling system for massive bolometers in dry cryostats
• Cryogen-free variable temperature scanning SQUID microscope
• Spin-mediated dissipation and frequency shifts of a cantilever at milliKelvin temperatures
• Scanning SQUID microscopy in a cryogen-free dilution refrigerator
• Development of a near-5-Kelvin, cryogen-free, pulse-tube refrigerator-based scanning probe microscope
• Piezo-driven sample rotation system with ultra-low electron temperature
• Scanning SQUID-on-tip microscope in a top-loading cryogen-free dilution refrigerator
• An ultrahigh-vacuum cryostat for simultaneous scanning tunneling microscopy and magneto-transport measurements down to 400mK
• The design and the performance of an ultrahigh vacuum 3He fridge-based scanning tunneling microscope with a double deck sample stage for in-situ tip treatment
• Characterization of two fast-turnaround dry dilution refrigerators for scanning probe microscopy
• Helium surface fluctuations investigated with superconducting coplanar waveguide resonator
• Density and $T_1$ of surface and bulk spins in diamond in high magnetic field gradients
• Feasibility of imaging using Boltzmann polarization in nuclear Magnetic Resonance Force Microscopy
• An analytical model for electronic noise in a cryogenic bolometer detector readout circuit
• Study of the effect of external noise pickups on the performance of a cryogenic bolometer
• A Milli-Kelvin Atomic Force Microscope Made of Glass
• Isolation solution for extreme environmental vibrations for quantum-enabling cryogenic setups installed on raised frames
• Vibrational sensing at mK temperatures in dry dilution refrigerators using commercial accelerometers for diverse fundamental physics applications