A Radiation-Hard Dual Channel 4-bit Pipeline for a 12-bit 40 MS/s ADC Prototype with extended Dynamic Range for the ATLAS Liquid Argon Calorimeter Readout Electronics Upgrade at the CERN LHC
arXiv:1308.0028 · doi:10.1088/1748-0221/8/09/P09008
Abstract
The design of a radiation-hard dual channel 12-bit 40 MS/s pipeline ADC with extended dynamic range is presented, for use in the readout electronics upgrade for the ATLAS Liquid Argon Calorimeters at the CERN Large Hadron Collider. The design consists of two pipeline A/D channels with four Multiplying Digital-to-Analog Converters with nominal 12-bit resolution each. The design, fabricated in the IBM 130 nm CMOS process, shows a performance of 68 dB SNDR at 18 MHz for a single channel at 40 MS/s while consuming 55 mW/channel from a 2.5 V supply, and exhibits no performance degradation after irradiation. Various gain selection algorithms to achieve the extended dynamic range are implemented and tested.
22 pages, 22 figures, accepted by JINST
References in corpus (1)
Cited by in corpus (15)
- FELIX: the New Detector Interface for the ATLAS Experiment
- A radiation-hard dual-channel 12-bit 40 MS/s ADC prototype for the ATLAS liquid argon calorimeter readout electronics upgrade at the CERN LHC
- LOCx2, a Low-latency, Low-overhead, 2 x 5.12-Gbps Transmitter ASIC for the ATLAS Liquid Argon Calorimeter Trigger Upgrade
- JTAG-based Remote Configuration of FPGAs over Optical Fibers
- A line code with quick-resynchronization capability and low latency for the optical data links of LHC experiments
- Component Prototypes towards a Low-Latency, Small-form-factor Optical Link for the ATLAS Liquid Argon Calorimeter Phase-I Trigger Upgrade
- A Low-Power, Low-Latency, Dual-Channel Serializer ASIC for Detector Front-End Readout
- The Clock and Control System for the ATLAS Liquid Argon Calorimeter Phase-I Upgrade
- LOCx2-130, a low-power, low-latency, 2 x 4.8-Gbps serializer ASIC for detector front-end readout
- Two low-power optical data transmission ASICs for the ATLAS Liquid Argon Calorimeter readout upgrade
- Performance and Quality Control of a Radiation-Hard 12-bit 40 MSPS ADC for the ATLAS Liquid Argon Calorimeter Trigger Readout Electronics Phase-I Upgrade at the LHC
- Design and simulation of a 12-bit, 40 MSPS asynchronous SAR ADC for the readout of PMT signal
- The Latency Validation of the Optical Link for the ATLAS Liquid Argon Calorimeter Phase-I Trigger Upgrade
- The Phase-I Trigger Readout Electronics Upgrade of the ATLAS Liquid Argon Calorimeters
- Quality control tests of the front-end optical link components for the ATLAS Liquid Argon Calorimeter Phase-1 upgrade