Money versus Time: Evaluation of Flow Control in Terms of Energy Consumption and Convenience

Abstract

Flow control with the goal of reducing the skin friction drag on the fluid-solid interface is an active fundamental research area, motivated by its potential for significant energy savings and reduced emissions in the transport sector. Customarily, the performance of drag reduction techniques in internal flows is evaluated under two alternative flow conditions, i.e. at constant mass flow rate or constant pressure gradient. Successful control leads to reduction of drag and pumping power within the former approach, whereas the latter leads to an increase of the mass flow rate and pumping power. In practical applications, however, money and time define the flow control challenge: a compromise between the energy expenditure (money) and the corresponding convenience (flow rate) achieved with that amount of energy has to be reached so as to accomplish a goal which in general depends on the specific application. Based on this idea, we derive two dimensionless parameters which quantify the total energy consumption and the required time (convenience) for transporting a given volume of fluid through a given duct. Performances of existing drag reduction strategies as well as the influence of wall roughness are re-evaluated within the present framework; how to achieve the (application-dependent) optimum balance between energy consumption and convenience is addressed. It is also shown that these considerations can be extended to external flows.

References in corpus (1)

• The laminar generalized Stokes layer and turbulent drag reduction

Cited by in corpus (11)

• A review of turbulent skin-friction drag reduction by near-wall transverse forcing
• Drag reduction induced by superhydrophobic surfaces in turbulent pipe flow
• Drag Reduction by Herringbone Riblet Texture in Direct Numerical Simulations of Turbulent Channel Flow
• Does the choice of the forcing term affect flow statistics in DNS of turbulent channel flow?
• Numerical simulation of turbulent duct flows with constant power input
• Turbulent drag reduction by spanwise wall forcing. Part 1: Large-eddy simulations
• Global energy fluxes in fully-developed turbulent channels with flow control
• Global energy budgets in turbulent Couette and Poiseuille flows
• On-off pumping for drag reduction in a turbulent channel flow
• Structure function tensor equations with triple decomposition
• Viscoelastic effect on steady wavy roll cells in wall-bounded shear flow