Demonstration of On-Sky Calibration of Astronomical Spectra using a 25 GHz near-IR Laser Frequency Comb
arXiv:1201.5125 · doi:10.1364/OE.20.006631
Abstract
We describe and characterize a 25 GHz laser frequency comb based on a cavity-filtered erbium fiber mode-locked laser. The comb provides a uniform array of optical frequencies spanning 1450 nm to 1700 nm, and is stabilized by use of a global positioning system referenced atomic clock. This comb was deployed at the 9.2 m Hobby-Eberly telescope at the McDonald Observatory where it was used as a radial velocity calibration source for the fiber-fed Pathfinder near-infrared spectrograph. Stellar targets were observed in three echelle orders over four nights, and radial velocity precision of \sim10 m/s (\sim6 MHz) was achieved from the comb-calibrated spectra.
12 pages, 7 figures
References in corpus (5)
- A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s
- High-precision wavelength calibration of astronomical spectrographs with laser frequency combs
- Astronomical spectrograph calibration with broad-spectrum frequency combs
- A High-Resolution Atlas of Uranium-Neon in the H Band
- A Pathfinder Instrument for Precision Radial Velocities in the Near-Infrared
Cited by in corpus (26)
- State of the Field: Extreme Precision Radial Velocities
- Stellar Spectroscopy in the Near-infrared with a Laser Frequency Comb
- Ultrabroadband supercontinuum generation and frequency-comb stabilization using on-chip waveguides with both cubic and quadratic nonlinearities
- A Versatile Technique to Enable sub-milli-Kelvin Instrument Stability for Precise Radial Velocity Measurements: Tests with the Habitable-zone Planet Finder
- Demonstration of a Near-IR Laser Comb for Precision Radial Velocity Measurements in Astronomy
- Precision radial velocities of 15 M5 - M9 dwarfs
- A Frequency Comb calibrated Solar Atlas
- Development of Fiber Fabry-Perot Interferometers as Stable Near-infrared Calibration Sources for High Resolution Spectrographs
- A crucial test for astronomical spectrograph calibration with frequency combs
- Mechanical control of a microrod-resonator optical frequency comb
- A 30 GHz electro-optic frequency comb spanning 300 THz in the near infrared and visible
- 2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments
- Comb-calibrated solar spectroscopy through a multiplexed single-mode fiber channel
- ROPS: A New Search for Habitable Earths in the Southern Sky
- Broadband near-infrared astronomical spectrometer calibration and on-sky validation with an electro-optic laser frequency comb
- Suppression of Fiber Modal Noise Induced Radial Velocity Errors for Bright Emission-Line Calibration Sources
- Stabilizing a Fabry-Perot etalon to 3 cm/s for spectrograph calibration
- Precision and consistency of astrocombs
- A new infrared Fabry-Pérot-based radial-velocity-reference module for the SPIRou radial-velocity spectrograph
- 'Modal-noise' in single-mode fibers: A cautionary note for high precision radial velocity instruments
- Rubidium-traced white-light etalon calibrator for radial velocity measurements at the cm/s level
- Generation of optical frequency combs via four-wave mixing processes for low- and medium-resolution astronomy
- Erbium-doped-fiber-based broad visible range frequency comb with a 30 GHz mode spacing for astronomical applications
- Frequency stability characterization of a broadband fiber Fabry-Perot interferometer
- Astro-comb calibrator and spectrograph characterization using a turn-key laser frequency comb
- The Habitable-zone Planet Finder Calibration System