AC loss in ReBCO pancake coils and stacks of them: modelling and measurement
arXiv:1109.2526 · doi:10.1088/0953-2048/25/3/035003
Abstract
Many applications of ReBCO coated conductors contain stacks of pancake coils. In order to reduce their high AC loss, it is necessary to understand the loss mechanisms. In this article, we measure and simulate the AC loss and the critical current, I_c, in stacks of pancake coils ("pancakes"). We construct stacks of up to 4 pancakes and we measure them by electrical means. We also obtain the anisotropic field dependence of J_c from I_c measurements of the tape. This J_c is the only input to the simulations, together with the coil dimensions. After validating our computations with the measurements, we simulate stacks of many pancakes, up to 32. We found that the AC loss in a stack of (four) pancakes is very high, two orders of magnitude larger than for a single tape. A double pancake behaves as a single one with double width but a stack of more pancakes is very different. Finally, we found that a 2-strand Roebel cable reduces the AC loss in a stack of pancakes but not in a single pancake. In conclusion, the AC loss in stacks of pancakes is too high. However, our simulations are useful to predict the AC loss and optimise the coil design, reducing the AC loss.
arXiv comment34 pages, 18 figures. All figures are modified; figures 3, 7 and 10 are new. Text thoroughly revised and extended
References in corpus (10)
- High current DyBCO-ROEBEL Assembled Coated Conductor (RACC)
- ac Losses in a Finite Z Stack Using an Anisotropic Homogeneous-Medium Approximation
- Theoretical and experimental study of AC loss in HTS single pancake coils
- Computing AC losses in stacks of high-temperature superconducting tapes
- Current distribution and ac loss for a superconducting rectangular strip with in phase alternating current and applied field
- Self-fields in thin superconducting tapes: implications to the thickness effect in coated conductors
- Practical vortex diodes from pinning enhanced YBa2Cu3O7-d
- Critical currents in vicinal YBaCuO films
- Thickness dependence of the critical current density in superconducting films: a geometrical approach
- Anisotropic superconducting strip in an oblique magnetic field
Cited by in corpus (17)
- Roebel cables from REBCO coated conductors: a one-century-old concept for the superconductivity of the future
- Electromagnetic modelling of superconductors with a smooth current-voltage relation: variational principle and coils from a few turns to large magnets
- T-A Formulation to Model Electrical Machines with HTS Coated Conductor Coils
- Non-twisted stacks of coated conductors for DC magnets: analysis of inductance and AC losses
- Angular dependenceof the magnetisation AC loss: coated conductors, Roebel cables and double pancake coils
- AC loss modelling in superconducting coils and motors with parallel tapes as conductor
- Comparison of 2D simulation models to estimate the critical current of a coated superconducting coil
- Modeling of screening currents in coated conductor magnets containing up to 40000 turns
- AC loss calculation in coated conductor coils with a large number of turns
- Ripple field losses in DC biased superconductors: simulations and comparison with measurements
- Influence of Coil Position on AC Losses of Stator Superconducting Windings of a Synchronous Machine for a 10 MW Wind Turbine
- Fast and accurate electromagnetic modeling of non-insulated and metal-insulated REBCO magnets
- Modelling of AC loss in coils made of thin tapes under DC bias current
- 3D Modeling of the Magnetization of Superconducting Rectangular-Based Bulks and Tape Stacks
- Electro-Thermal Modelling by Novel Variational Methods: Racetrack Coil in Short-Circuit
- Screening currents increase thermal quench propagation speed in ultra-high-field REBCO magnets
- AC loss calculation for multi pancakes of (Re)BCO coated conductor using line front