Modelling of AC loss in coils made of thin tapes under DC bias current
arXiv:1307.5055 · doi:10.1109/TASC.2013.2282495
Abstract
Many applications, such as magnets and SMES, are usually charged and discharged under a bias DC current, which may increase the AC loss. For their design, it is necessary to understand and predict the AC loss. This article analises the AC loss in magnet-like coils under DC bias contribution super-imposed to the AC current. The analysis is based on a numerical model that takes the interaction between magnetization currents in all turns into account. The studied example is a stack of 32 pancake coils with 200 turns each made of thin tape, such as BCO coated conductor. We present the current density, the instantaneous power loss, and loss per cycle. We have found that the loss increases with the DC bias current. The instantaneous power loss is the largest in the initial rise of the the AC current. In following cycles, the power loss is higher in the current increase than in the decrease. The loss per cycle is the largest at the end pancakes. In conclusion, the highest cooling power should be supplied to the top and bottom pancakes and during current rise, specially the initial one. The presented model has a high potential to predict the AC loss in magnet-size coils, useful for their design.
arXiv comment13 pages, 6 figures
References in corpus (8)
- Calculation of AC losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applications
- Computation of Losses in HTS Under the Action of Varying Magnetic Fields and Currents
- Why an ac magnetic field shifts the irreversibility line in type-II superconductors
- AC loss in ReBCO pancake coils and stacks of them: modelling and measurement
- Theoretical and experimental study of AC loss in HTS single pancake coils
- Computing AC losses in stacks of high-temperature superconducting tapes
- Current distribution and ac loss for a superconducting rectangular strip with in phase alternating current and applied field
- AC loss calculation in coated conductor coils with a large number of turns