Electro-Thermal Modelling by Novel Variational Methods: Racetrack Coil in Short-Circuit
arXiv:2302.01673 · doi:10.1109/TASC.2023.3252492
Abstract
The design of superconducting applications containing windings of superconducting wires or tapes requires electro-thermal quench modelling. In this article, we present a reliable numerical method based on a variational principle and we benchmark it to a conventional finite difference method that we implemented in C++. As benchmark problem, we consider a racetrack coil made of REBCO superconducting tape under short circuit, approximated as a DC voltage that appears at the initial time. Results show that both models agree with each other and analytical limits. Since both models take screening currents into account, they are promising for the design of magnets (especially fast-ramp magnets) and power applications, such as the stator windings of superconducting motors or generators.
Accepted Version
References in corpus (4)
- Electromagnetic modelling of superconductors with a smooth current-voltage relation: variational principle and coils from a few turns to large magnets
- AC loss in ReBCO pancake coils and stacks of them: modelling and measurement
- 3D computation of non-linear eddy currents: variational method and superconducting cubic bulk
- Modeling the charging process of a coil by an HTS dynamo-type flux pump