Advanced noise reduction techniques for ultra-low phase noise optical-to-microwave division with femtosecond fiber combs

Abstract

We report what we believe to be the lowest phase noise optical-to-microwave frequency division using fiber-based femtosecond optical frequency combs: a residual phase noise of -120dBc/Hz at 1 Hz offset from a 11.55GHz carrier frequency. We furthermore report a detailed investigation into the fundamental noise sources which afflicts the division process itself. Two frequency combs with quasi-identical configurations are referenced to a common ultrastable cavity laser source. To identify each of the limiting effects we implement an ultra-low noise carrier-suppression measurement system, which circumvents the detection and amplification noise of more conventional techniques. This technique now allows the suppression of these unwanted sources of noise to very low levels. In the Fourier frequency range of ~200 Hz to 100 kHz, a fed-forward technique based on a voltage-controlled phase shifter delivers a further noise reduction of 10 dB. For lower Fourier frequencies, optical power stabilization is implemented in order to reduce the relative intensity noise which causes unwanted phase noise through power to phase conversion in the detector. We implement and compare two possible control schemes based on an acousto-optical modulator and comb pump current. We also present wideband measurements on the relative intensity noise of the fiber comb.

16 pages, 10 figures accepted in

References in corpus (9)

• Generation of Ultrastable Microwaves via Optical Frequency Division
• Sr lattice clock at 1x10^{-16} fractional uncertainty by remote optical evaluation with a Ca clock
• Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization
• Compact, thermal-noise-limited optical cavity for diode laser stabilization at 1 x 10-15
• Absolute frequency measurement of the 40Ca+ S1/2 - D5/2 clock transition
• Long-distance frequency transfer over an urban fiber link using optical phase stabilization
• Characterization of Power-to-Phase Conversion in High-Speed P-I-N Photodiodes
• An Optical Lattice Clock with Spin-polarized 87Sr Atoms
• Spin-1/2 Optical Lattice Clock

Cited by in corpus (5)

• Sub-femtosecond synchronization of microwave oscillators with mode-locked Er-fiber lasers
• Characterizing a fiber-based frequency comb with electro-optic modulator
• Suppression of amplitude-to-phase noise conversion in balanced optical-microwave phase detectors
• Ultra-low phase noise all-optical microwave generation setup based on commercial devices
• Simple Stabilized Radio-Frequency Transfer with Optical Phase Actuation