Superconducting properties of SmO1-xFxFeAs wires with Tc = 52 K prepared by the powder-in-tube method
arXiv:0806.2451 · doi:10.1088/0953-2048/21/11/112001
Abstract
We demonstrate that Ta sheathed SmO1-xFxFeAs wires were successfully fabricated by the powder-in-tube (PIT) method for the first time. Structural analysis by mean of x-ray diffraction shows that the main phase of SmO1-xFxFeAs was obtained by this synthesis method. The transition temperature of the SmO0.65F0.35FeAs wires was confirmed to be as high as 52 K. Based on magnetization measurements, it is found that a globe current can flow on macroscopic sample dimensions with Jc of ~3.9x10^3 A/cm^2 at 5 K and self field, while a high Jc about 2x10^5 A/cm^2 is observed within the grains, suggesting that a significant improvement in the globle Jc is possible. It should be noted that the Jc exhibits a very weak field dependence behavior. Furthermore, the upper critical fields (Hc2) determined according to the Werthamer-Helfand-Hohenberg formula are (T= 0 K) = 120 T, indicating a very encouraging application of the new superconductors.
arXiv comment14 pages, 6 figures
References in corpus (5)
- Superconductivity in iron-based F-doped layered quaternary compound Nd[O1-xFx]FeAs
- Very High Field Two-Band Superconductivity in LaFeAsO_0.89F_0.11
- Superconductivity at 25 K in hole doped
- Electron Correlations in the Low Carrier Density LaFeAsO0.89F0.11 Superconductor (Tc = 28 K)
- Superconductivity at 36 K in Gadolinium-arsenide Oxides GdOFFeAs
Cited by in corpus (29)
- Superconductivity in Iron Compounds
- Exploration of new superconductors and functional materials and fabrication of superconducting tapes and wires of iron pnictides
- New Fe-based superconductors: properties relevant for applications
- High intergrain critical current density in fine-grain (Ba0.6K0.4)Fe2As2 wires and bulks
- The behavior of grain boundaries in the Fe-based superconductors
- Fabrication of the iron-based superconducting wire using Fe(Se, Te)
- To use or not to use cool superconductors?
- Large Transport Critical Current Densities of Ag Sheathed (Ba,K)Fe2As2+Ag Superconducting Wires Fabricated by an ex-situ Powder-in-Tube (PIT) Process
- Large transport critical currents of powder-in-tube Sr0.6K0.4Fe2As2/Ag superconducting wires and tapes
- Intergrain current flow in a randomly oriented polycrystalline SmFeAsO0.85 oxypnictide
- Superconductivity of powder-in-tube Sr0.6K0.4Fe2As2 wires
- High transport critical current densities in textured Fe-sheathed Sr1-xKxFe2As2+Sn superconducting tapes
- Fabrication and characterization of iron pnictide wires and bulk materials through the powder-in-tube method
- Thin Film Growth and Device Fabrication of Iron-Based Superconductors
- Effective Ex-Situ Fabrication of F-Doped SmFeAsO Wire for High Transport Critical Current Density
- Development of Powder-in-Tube Processed Iron Pnictide Wires and Tapes
- Oxypnictide SmFeAs(O,F) superconductor: a candidate for high-field magnet applications
- Evidence for electromagnetic granularity in polycrystalline Sm1111 iron-pnictides with enhanced phase purity
- Structural and critical current properties in polycrystalline SmO1-xFxFeAs
- Superconducting properties of FeSe wires and tapes prepared by gas diffusion technique
- Low-temperature synthesis of SmO0.8F0.2FeAs superconductor with Tc = 56.1K
- Global and local critical current density in superconducting SmFeAsOF measured by two methods
- Neutron Irradiation of Sm-1111
- High-pressure growth of fluorine-free SmFeAsO superconducting single crystals
- Enhancement of transport critical current density of SmFeAsO1-xFx tapes fabricated by an ex-situ powder-in-tube method with a Sn-presintering process
- The magnetization of PrFeAsOF$_{0.12} sueprconductor
- Single Vortex Pinning and Penetration Depth in Superconducting NdFeAsOF
- Analysis of interdiffusion between SmFeAsO0.92F0.08 and metals for ex situ fabrication of superconducting wire
- α-FeAs-free SmFeAsO1-xFx by low temperature sintering with slow cooling