output
20012026
most citedSegregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy

355 citations

Showing cond-mat.mtrl-sciShow all

46 papers · 1 filter

cond-mat.mtrl-sci2026★ 39 cited

Molecular-based coordination polymer as reversible and precise acetonitrile electro-optical readout

Esther Resines-Urien, Enrique Burzurí, Estefania Fernandez-Bartolome +5

Efficient detection of harmful organic volatile compounds is a major health and environmental need in industrialized societies. Tailor-made metal-organic frameworks and other coord…

cond-mat.mtrl-sci2025

Experimental methods to measure thermal hysteresis of martensite-austenite transition in bulk \b{eta}-Cu-Zn-Al composition gradient single crystals

O. Goisot, H. vanLandeghem, R. Haettel +4

Improvement of functional and structural fatigue endurance for applications of ferroelastic materials requires an optimization of their composition. We propose an experimental meth…

cond-mat.mtrl-sci2025★ 4 cited

MC3D: The Materials Cloud computational database of experimentally known stoichiometric inorganics

Sebastiaan P. Huber, Michail Minotakis, Marnik Bercx +7

DFT is a widely used method to compute properties of materials, which are often collected in databases and serve as valuable starting points for further studies. In this article, w…

cond-mat.mtrl-sci2025★ 3 cited

aLLoyM: A large language model for alloy phase diagram prediction

Yuna Oikawa, Guillaume Deffrennes, Taichi Abe +2

Large Language Models (LLMs) are general-purpose tools with wide-ranging applications, including in materials science. In this work, we introduce aLLoyM, a fine-tuned LLM specifica…

cond-mat.mtrl-sci2025

Active Learning for Predicting the Enthalpy of Mixing inBinary Liquids Based on Ab Initio Molecular Dynamics

Quentin Bizot, Ryo Tamura, Guillaume Deffrennes

The enthalpy of mixing in the liquid phase is an important property for predicting phase formation in alloys. It can be estimated in a large compositional space from pair wise inte…

cond-mat.mtrl-sci2024★ 15 cited

Data-driven study of the enthalpy of mixing in the liquid phase

Guillaume Deffrennes, Bengt Hallstedt, Taichi Abe +5

The enthalpy of mixing in the liquid phase is a thermodynamic property reflecting interactions between elements that is key to predict phase transformations. Widely used models exi…

cond-mat.mtrl-sci2024

Machine learning Hubbard parameters with equivariant neural networks

Martin Uhrin, Austin Zadoks, Luca Binci +2

Density-functional theory with extended Hubbard functionals (DFT++) provides a robust framework to accurately describe complex materials containing transition-metal or rare-e…

cond-mat.mtrl-sci2024★ 1 cited

Influence of microstructure on mass loss caused by acoustic and hydrodynamic cavitation

Julien Hofmann, Charles Thiébaut, Michel Riondet +3

The proposed study investigates the damage mechanisms of martensitic stainless steel X3CrNiMo13-4 exposed to cavitation using two complementary experimental apparatus: ultrasonic h…

cond-mat.mtrl-sci2023★ 6 cited

Improved ACOM pattern matching in 4D STEM through adaptive sub pixel peak detection and image reconstruction

Nicolas Folastre, Junhao Cao, Gozde Oney +7

The technique known as 4D-STEM has recently emerged as a powerful tool for the local characterization of crystalline structures in materials, such as cathode materials for Li-ion b…

cond-mat.mtrl-sci2022

Structure and morphology evolution of concave-shaped SiC {0001} surfaces in liquid silicon

Xinming Xing, Takeshi Yoshikawa, Didier Chaussende

Concave-shaped 4H-SiC {0001} surfaces have been prepared and reconstructed in pure liquid silicon for investigating the structure and morphology evolution of the SiC surface as a f…

cond-mat.mtrl-sci2022★ 5 cited

Probing the SO adsorption mechanism in Hofmann clathrates via inelastic neutron scattering and density functional theory calculations

Ángel Fernández-Blanco, Lucía Piñeiro-López, Mónica Jiménez-Ruiz +4

The adsorption mechanism of SO2 in the Hofmann-like coordination polymer Fe(pz)[Pt(CN)4] is studied using inelastic neutron scattering and density functional theory calculations. W…

cond-mat.mtrl-sci2022★ 14 cited

Nanoindentation-induced deformation twinning in MAX phase TiAlN

Christophe Tromas, Salomé Parent, Wilgens Sylvain +6

Plastic deformation mechanisms have been investigated in the MAX phase Ti2AlN. Nanoindentation has been used to induce plastic deformation in a single grain, and a Transmission Ele…

cond-mat.mtrl-sci2021

Microstructure and correlated mechanical properties study of Ni-(Fe, Co)-Mn-(Al, In) as-spun ribbons

Chunyang Zhang, Laureline Porcar, Salvatore Miraglia +4

The Ni-Mn-based shape memory alloys as a promising candidate of elastocaloric material has been reported in many literatures, especially on bulk samples. The as-spun ribbon, which…

cond-mat.mtrl-sci2021★ 9 cited

Design of a V-Ti-Ni alloy with superelastic nano-precipitates

J. -L. Zhang, J. L. Cann, S. B. Maisel +8

Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known f…

cond-mat.mtrl-sci2021★ 16 cited

Investigation of the orientation relationship between nano-sized G-phase precipitates and austenite with scanning nano-beam electron diffraction using a pixelated detector

Niels Cautaerts, Edgar F. Rauch, Jiwon Jeong +2

Scanning nano-beam electron diffraction with a pixelated detector was employed to investigate the orientation relationship of nanometer sized, irradiation induced G-phase (MNi$…

cond-mat.mtrl-sci2020★ 20 cited

The Benefits of Trace Cu in Wrought Al-Mg Alloys

S. Medrano, H. Zhao, B. Gault +2

The softening and strengthening contributions in pre-deformed and aged Al-Mg-Cu alloys containing 3wt.%Mg and 0.5wt.%Cu are evaluated by a combination of microscopy, mechanical tes…

cond-mat.mtrl-sci2020★ 84 cited

Metal (boro-) hydrides for high energy density storage and relevant emerging technologies

L. J. Bannenberg, M. Heere, H. Benzidi +23

The current energy transition imposes a rapid implementation of energy storage systems with high energy density and eminent regeneration and cycling efficiency. Metal hydrides are…

cond-mat.mtrl-sci2020★ 17 cited

Intermixing of Fe and Cu on the atomic scale by high-pressure torsion as revealed by DC- and AC-SQUID susceptometry and atom probe tomography

Martin Stückler, Heinz Krenn, Philipp Kürnsteiner +6

The capability of high-pressure torsion on the preparation of supersaturated solid solutions, consisting of Cu-14Fe (wt.%), is studied. From microstructural investigations a steady…

cond-mat.mtrl-sci2020

Structural and lattice-dynamical properties of Tb2O3 under compression: a comparative study with rare-earth and related sesquioxides

Jordi Ibáñez, Juan Ángel Sans, Vanesa Cuenca-Gotor +9

We report a joint experimental and theoretical investigation of the high-pressure structural and vibrational properties of terbium sesquioxide (Tb2O3). Powder x-ray diffraction and…

cond-mat.mtrl-sci2020★ 3 cited

A simple approach to bulk bioinspired tough ceramics

Hassan Saad, Kaoutar Radi, Thierry Douillard +4

The development of damage-resistant structural materials that can withstand harsh environments is a major issue in materials science and engineering. Bioinspired brick-and-mortar d…

cond-mat.mtrl-sci2020★ 6 cited

Depressions by stacking faults in nanorippled graphene on metals

Georg Daniel Förster, Alexandre Artaud, Estelle Mazaleyrat +9

A broad variety of defects has been observed in two-dimensional materials. Many of these defects can be created by top-down methods such as electron irradiation or chemical etching…

cond-mat.mtrl-sci2019★ 135 cited

Metrology of small particles and solute clusters by atom probe tomography

Frédéric De Geuser, Baptiste Gault

Atom probe tomography (APT) is routinely used for analyzing property-enhancing particles in the nanometer-size range and below, and plays a prominent role in the analysis of solute…

cond-mat.mtrl-sci2019★ 304 cited

Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys

Paraskevas Kontis, Edouard Chauvet, Zirong Peng +9

There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth…

cond-mat.mtrl-sci2019★ 107 cited

Structure and mechanical behavior of ultrafine-grained aluminum-iron alloy stabilized by nanoscaled intermetallic particles

Amandine Duchaussoy, Xavier Sauvage, Kaveh Edalati +4

Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to the…