611 citations · 11k across the 351 of their papers we have counts for
20 papers · 1 filter
High-level hadronic tau lepton triggers of the CMS experiment in proton-proton collisions at = 13.6 TeV
CMS Collaboration
The trigger system of the CMS detector is pivotal in the acquisition of data for physics measurements and searches. Studies of final states characterized by hadronic decays of tau…
Performance of heavy-flavour jet identification in Lorentz-boosted topologies in proton-proton collisions at = 13 TeV
CMS Collaboration
Measurements in the highly Lorentz-boosted regime provoke increased interest in probing the Higgs boson properties and in searching for particles beyond the standard model at the L…
Operation and performance of the CMS silicon strip tracker with proton-proton collisions at the CERN LHC
CMS Collaboration
Salient aspects of the commissioning, calibration, and performance of the CMS silicon strip tracker are discussed, drawing on experience during operation with proton-proton collisi…
The CMS Barrel Timing Layer: test beam confirmation of module timing performance
F. Addesa, P. Akrap, A. Albert +127
First of its kind, the barrel section of the MIP Timing Detector is a large area timing detector based on LYSO:Ce crystals and SiPMs which are required to operate in an unprecedent…
Performance of the CMS high-level trigger during LHC Run 2
CMS Collaboration
The CERN LHC provided proton and heavy ion collisions during its Run 2 operation period from 2015 to 2018. Proton-proton collisions reached a peak instantaneous luminosity of 2.1 $…
Dual-Mode Calorimetric Superconducting Nanowire Single Photon Detectors
Hsin-Yeh Wu, Marc Besançon, Jia-Wern Chen +9
A dual-operation mode SNSPD is proposed. In the conventional Geiger mode, the sensor operates at temperatures well below the critical temperature, Tc, working as an event counter w…
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
M. Aamir, G. Adamov, T. Adams +568
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transv…
Performance of the CMS electromagnetic calorimeter in pp collisions at = 13 TeV
CMS Collaboration
The operation and performance of the Compact Muon Solenoid (CMS) electromagnetic calorimeter (ECAL) are presented, based on data collected in pp collisions at = 13 TeV a…
Portable acceleration of CMS computing workflows with coprocessors as a service
CMS Collaboration
Computing demands for large scientific experiments, such as the CMS experiment at the CERN LHC, will increase dramatically in the next decades. To complement the future performance…
Timing Performance of the CMS High Granularity Calorimeter Prototype
CMS HGCAL collaboration
This paper describes the experience with the calibration, reconstruction and evaluation of the timing capabilities of the CMS HGCAL prototype in the beam tests in 2018. The calibra…
Autoencoder-based Anomaly Detection System for Online Data Quality Monitoring of the CMS Electromagnetic Calorimeter
The CMS ECAL Collaboration
The CMS detector is a general-purpose apparatus that detects high-energy collisions produced at the LHC. Online Data Quality Monitoring of the CMS electromagnetic calorimeter is a…
Development of the CMS detector for the CERN LHC Run 3
CMS Collaboration
Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for…
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20300 GeV/c
B. Acar, G. Adamov, C. Adloff +454
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimete…
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
B. Acar, G. Adamov, C. Adloff +385
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a protot…
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
R. Abbott, A. Abreu, F. Addesa +196
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event re…
Construction and commissioning of CMS CE prototype silicon modules
B. Acar, G. Adamov, C. Adloff +327
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling cal…
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
B. Acar, G. Adamov, C. Adloff +327
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant wit…
Precision measurement of the structure of the CMS inner tracking system using nuclear interactions
CMS Collaboration
The structure of the CMS inner tracking system has been studied using nuclear interactions of hadrons striking its material. Data from proton-proton collisions at a center-of-mass…
Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter
The CMS Electromagnetic Calorimeter Group, P. Adzic, N. Almeida +267
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The produ…
The Upgraded D0 Detector
D0 Collaboration
The D0 experiment enjoyed a very successful data-collection run at the Fermilab Tevatron collider between 1992 and 1996. Since then, the detector has been upgraded to take advantag…