28 citations · 88 across the 20 of their papers we have counts for
20 papers
Cracking under pressure --- investigating mitigation approaches for silicon fractures on ATLAS strip tracker petals at cold temperatures
S. H. Abidi, J. -H. Arling, M. J. Basso +35
For the High-Luminosity upgrade of the Large Hadron Collider, the ATLAS experiment will replace its current Inner Detector with an all-silicon Inner Tracker (ITk), consisting of pi…
Fast Timing and TCT Measurement Results of CNM Double-Sided 3D Sensors
Fabian Lex, Alexander Dierlamm, Teresa Hasler +12
Sensors with fast timing capabilities (on the order of tens of picoseconds) are a critical component of future HEP tracking detectors, providing the ability to disentangle high mul…
Characterization of Passive CMOS Strip Detectors After Proton Irradiation
Marta Baselga, Jan-Hendrik Arling, Naomi Davis +14
Strip detectors are populating outer trackers of high-energy particle experiments. They are convenient for covering large areas of sensitive material since they use less power and…
Impact of Cold Noise on the tracking performance of ATLAS ITk short strip barrel modules using a charged particle beam
Tony Affolder, Jan-Hendrik Arling, Sten Astrand +23
The inner tracking system of the ATLAS experiment will be upgraded to a full silicon detector in 2030 for HL-LHC. The new tracking system is called ITk, the Inner Tracker. It is re…
Investigating the impact of the diode edge geometry on the effective active area of silicon sensors using AREA-X
Luise Poley, Ian Dyckes, Javier Fernandez-Tejero +3
Sensors for particle tracking detectors are required to provide a maximum active area in addition to fulfilling performance criteria concerning radiation hardness, charge collectio…
TCAD Simulation of Stitching for Passive CMOS Strip Detectors
Marta Baselga, Jan Hendrik Arling, Naomi Davis +15
Most of the tracking detectors for high energy particle experiments are filled with silicon detectors since they are radiation hard, they can give very small spatial resolution and…