activity
19982026
most citedCombined measurements of Higgs boson couplings in proton-proton collisions at 13 TeV

442 citations · 10.6k across the 413 of their papers we have counts for

collaborators
Showing physics.ins-detShow all

26 papers · 1 filter

physics.ins-det2026

High-level hadronic tau lepton triggers of the CMS experiment in proton-proton collisions at = 13.6 TeV

CMS Collaboration

The trigger system of the CMS detector is pivotal in the acquisition of data for physics measurements and searches. Studies of final states characterized by hadronic decays of tau…

physics.ins-det2026

Full event interpretation with machine-learning-based particle-flow reconstruction in the CMS detector

CMS Collaboration

The particle-flow (PF) algorithm constructs a global description of each particle collision by producing a comprehensive list of final-state particles, and is central to event reco…

physics.ins-det2025★ 5 cited

Performance of heavy-flavour jet identification in Lorentz-boosted topologies in proton-proton collisions at = 13 TeV

CMS Collaboration

Measurements in the highly Lorentz-boosted regime provoke increased interest in probing the Higgs boson properties and in searching for particles beyond the standard model at the L…

physics.ins-det2025★ 1 cited

Operation and performance of the CMS silicon strip tracker with proton-proton collisions at the CERN LHC

CMS Collaboration

Salient aspects of the commissioning, calibration, and performance of the CMS silicon strip tracker are discussed, drawing on experience during operation with proton-proton collisi…

physics.ins-det2025★ 9 cited

The CMS Barrel Timing Layer: test beam confirmation of module timing performance

F. Addesa, P. Akrap, A. Albert +127

First of its kind, the barrel section of the MIP Timing Detector is a large area timing detector based on LYSO:Ce crystals and SiPMs which are required to operate in an unprecedent…

physics.ins-det2024★ 42 cited

Performance of the CMS high-level trigger during LHC Run 2

CMS Collaboration

The CERN LHC provided proton and heavy ion collisions during its Run 2 operation period from 2015 to 2018. Proton-proton collisions reached a peak instantaneous luminosity of 2.1 $…

physics.ins-det2024★ 9 cited

Performance of the CMS electromagnetic calorimeter in pp collisions at = 13 TeV

CMS Collaboration

The operation and performance of the Compact Muon Solenoid (CMS) electromagnetic calorimeter (ECAL) are presented, based on data collected in pp collisions at = 13 TeV a…

physics.ins-det2024★ 6 cited

Portable acceleration of CMS computing workflows with coprocessors as a service

CMS Collaboration

Computing demands for large scientific experiments, such as the CMS experiment at the CERN LHC, will increase dramatically in the next decades. To complement the future performance…

physics.ins-det2023★ 4 cited

Timing Performance of the CMS High Granularity Calorimeter Prototype

CMS HGCAL collaboration

This paper describes the experience with the calibration, reconstruction and evaluation of the timing capabilities of the CMS HGCAL prototype in the beam tests in 2018. The calibra…

physics.ins-det2023★ 1 cited

Development of the CMS detector for the CERN LHC Run 3

CMS Collaboration

Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for…

physics.ins-det2022

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20300 GeV/c

B. Acar, G. Adamov, C. Adloff +454

The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimete…

physics.ins-det2021★ 19 cited

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

B. Acar, G. Adamov, C. Adloff +385

The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a protot…

physics.ins-det2021★ 14 cited

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

R. Abbott, A. Abreu, F. Addesa +196

The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event re…

physics.ins-det2020

Construction and commissioning of CMS CE prototype silicon modules

B. Acar, G. Adamov, C. Adloff +327

As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling cal…

physics.ins-det2020★ 10 cited

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

B. Acar, G. Adamov, C. Adloff +327

The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant wit…

physics.ins-det2019★ 1 cited

New Technologies for Discovery

Z. Ahmed, A. Apresyan, M. Artuso +80

For the field of high energy physics to continue to have a bright future, priority within the field must be given to investments in the development of both evolutionary and transfo…

physics.ins-det2019★ 11 cited

Novel Resistive-Plate WELL sampling element for (S)DHCAL

S. Bressler, P. Bhattacharya, A. Breskin +10

Digital and Semi-Digital Hadronic Calorimeters (S)DHCAL were suggested for future Colliders as part of the particle-flow concept. Though studied mostly with RPC-based techniques, i…

physics.ins-det2018★ 20 cited

Precision measurement of the structure of the CMS inner tracking system using nuclear interactions

CMS Collaboration

The structure of the CMS inner tracking system has been studied using nuclear interactions of hadrons striking its material. Data from proton-proton collisions at a center-of-mass…

physics.ins-det2018★ 2 cited

R&D Proposal, RD51 Extension Beyond 2018

S. Dalla Torre, E. Oliveri, L. Ropelewski +1

The RD51 Collaboration, in charge of the development and dissemination of MicroPattern Gaseous Detectors (MPGD) since 2008, proposes to extend its activity, after 2018, for a furth…

physics.ins-det2016★ 4 cited

A Time Projection Chamber with GEM-Based Readout

The LCTPC Collaboration, David Attié, Ties Behnke +67

For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the…

physics.ins-det2015★ 1 cited

Proceedings of the third French-Ukrainian workshop on the instrumentation developments for HEP

F. Alessio, S. Ya. Barsuk, L. Berge +70

The reports collected in these proceedings have been presented in the third French-Ukrainian workshop on the instrumentation developments for high-energy physics held at LAL, Orsay…

physics.ins-det2012★ 21 cited

Performances of Anode-resistive Micromegas for HL-LHC

J. Manjarres, T. Alexopoulos, D. Attie +14

Micromegas technology is a promising candidate to replace Atlas forward muon chambers -tracking and trigger- for future HL-LHC upgrade of the experiment. The increase on background…

physics.ins-det2012★ 9 cited

Performances and ageing study of resistive-anodes Micromegas detectors for HL-LHC environment

F. Jeanneau, T. Alexopoulos, D. Attié +15

With the tenfold luminosity increase envisaged at the HL-LHC, the background (photons, neutrons, ...) and the event pile-up probability are expected to increase in proportion in th…

physics.ins-det2011★ 5 cited

Aging studies of Micromegas prototypes for the HL-LHC

J. Galan, D. Attie, J. Derre +9

The micromegas technology is a promising candidate to replace the forward muon chambers for the luminosity upgrade of ATLAS. The LHC accelerator luminosity will be five times the n…