58 citations · 210 across the 25 of their papers we have counts for
26 papers
Towards a Muon Collider
Carlotta Accettura, Dean Adams, Rohit Agarwal +294
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions a…
Differential cross-section measurements for neutron-induced production reactions on carbon across neutron energy range of 6.2 to 76 MeV
Longxiang Liu, Kang Sun, Han Yi +24
Angle-differential cross sections for neutron-induced production in carbon were determined at thirty discrete neutron energy levels ranging from 6.2 to 76 MeV at the Back-n whi…
Study Overview for Super Proton-Proton Collider
Jingyu Tang, Yuhong Zhang, Qingjin Xu +3
SPPC (Super Proton-Proton Collider) is a discovery machine that is designed for energy frontier research in two decades from now, as the second stage of the CEPC-SPPC project. The…
Experimental demonstration of the short bunch extraction by bunch rotation in a high-intensity rapid cycling proton synchrotron
Linhao Zhang, Yukai Chen, Jingyu Tang +3
Short bunch proton beams are of great significance for the applications of white neutron beams and muon beams. The accelerator complex of China Spallation Neutron Source (CSNS) was…
Simulation studies for upgrading a high-intensity surface muon beamline at Paul Scherrer Institute
Lu-Ping Zhou, Xiao-Jie Ni, Zaher Salman +4
The E4-LEM beamline at Paul Scherrer Institute (PSI, Switzerland) is a special muon beamline combining the hyprid type surface muon beamline E4 with the low energy muon facil…
Problem and solution with the longitudinal tracking of the ORBIT code
Linhao Zhang, JIngyu Tang, Yukai Chen
The ORBIT code has been widely used for beam dynamics simulations including injection and acceleration in high-intensity hadron synchrotrons. When the ORBIT's 1D longitudinal track…
Study on multi-fold bunch splitting in a high-intensity medium-energy proton synchrotron
Linhao Zhang, Min Chen, Jingyu Tang
Bunch splitting is an RF manipulation method of changing the bunch structure, bunch numbers and bunch intensity in the high-intensity synchrotrons that serve as the injector for a…
Beam-beam effects in the Super Proton-Proton Collider
Li-Jiao Wang, Tanaji Sen, Jing-Yu Tang
The Supper Proton-Proton Collider is a next-generation hadron collider that is now being designed. A baseline design aims for a peak luminosity of about 1*10^35 cm^-2 s^-1. The foc…
Weak-Strong Simulation of Beam-Beam Effects in Super Proton-Proton Collider
Lijiao Wang, Jingyu Tang, Tanaji Sen
A Super Proton-Proton Collider (SPPC) that aims to explore new physics beyond the standard model will be built in China. Here we focus on the impact of beam-beam interactions in th…
Measurements of differential and angle-integrated cross sections for the B()Li reaction in the neutron energy range from 1.0 eV to 2.5 MeV
Haoyu Jiang, Wei Jiang, Huaiyong Bai +85
Differential and angle-integrated cross sections for the B()Li, B()Li and B()Li reactions have been measu…
Measurement of the neutron beam profile of the Back-n white neutron facility at CSNS with a Micromegas detector
Binbin Qi, Yang Li, Danyang Zhu +83
The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurement…
Design of 32-channel TDC Based on Single FPGA for μSR Spectrometer at CSNS
Fanshui Deng, Hao Liang, Bangjiao Ye +1
Muon Spin Rotation, Relaxation and Resonance (μSR) technology has an irreplaceable role in studying the microstructure and properties of materials, especially micro-magnetic proper…
Energy-resolved fast neutron resonance radiography at CSNS
Zhixin Tan, Jingyu Tang, Hantao Jing +8
The white neutron beamline at the China Spallation Neutron Source will be used mainly for nuclear data measurements. It will be characterized by high flux and broad energy spectra.…
Collimation method studies for next-generation hadron colliders
Jianquan Yang, Ye Zou, Jingyu Tang
In order to handle extremely-high stored energy in future proton-proton colliders, an extremely high-efficiency collimation system is required for safe operation. At LHC, the major…
Radiation Studies for the Target Station of the MOMENT
Qing-Nian Xu, Jian-Fei Tong, Nikolaos Vassilopoulos +10
The discovery of the neutrino mixing angle opens new opportunities for the discovery of the leptonic CP violation for high intensity neutrino beams. MOMENT a future neutri…
Resonant slow extraction in synchrotrons by using anti-symmetric sextupole fields
Ye Zou, Jingyu Tang, Jianquan Yang
This paper proposes a novel method for resonant slow extraction in synchrotrons by using special anti-symmetric sextupole fields, which can be produced by a special magnet structur…
The opportunity offered by the ESSnuSB project to exploit the larger leptonic CP violation signal at the second oscillation maximum and the requirements of this project on the ESS accelerator complex
Elena Wildner, Michel Martini, Horst Schonauer +5
Very intense neutrino beams and large neutrino detectors will be needed to enable the discovery of CP violation in the leptonic sector. The European Spallation Source (ESS), curren…
Concept for a Future Super Proton-Proton Collider
Jingyu Tang, J. Scott Berg, Weiping Chai +48
Following the discovery of the Higgs boson at LHC, new large colliders are being studied by the international high-energy community to explore Higgs physics in detail and new physi…
Mismatch study of C-ADS main linac
Cai Meng, Jing-Yu Tang, Shi-Lun Pei +1
The ADS accelerator in China is a CW (Continuous-Wave) proton linac with 1.5 GeV in beam energy, 10 mA in beam current, and 15 MW in beam power. To meet the extremely low beam loss…
Transverse profile expansion and homogenization at target for the injector Scheme-I test stand of China-ADS
Zheng Yang, Jing-Yu Tang, Fang Yan +4
For the injector Scheme-I test stand of the China-ADS, a beam with the maximum power of 100 kW will be produced and transported to the beam dump. At the beam dump, the beam power w…
MOMENT: a muon-decay medium-baseline neutrino beam facility
Jun Cao, Miao He, Zhi-Long Hou +9
Neutrino beam with about 300 MeV in energy, high-flux and medium baseline is considered a rational choice for measuring CP violation before the more powerful Neutrino Factory will…
A CW superconducting linac as the proton driver for a medium baseline neutrino beam in China
Zhihui Li, Jingyu Tang
In a long-term planning for neutrino experiments in China, a medium baseline neutrino beam is proposed which uses a CW superconducting linac of 15 MW in beam power as the proton dr…
Error analysis and lattice improvement for the C-ADS Injector-I
Cai Meng, Zhihui Li, Jingyu Tang
The injector (Scheme-I) of the C-ADS linac is a 10-mA 10-MeV proton linac working in CW mode. It is mainly comprised of a 3.2-MeV room-temperature 4-vane RFQ and twelve superconduc…
Physics design for the C-ADS main linac basing on two different injector design schemes
Fang Yan, Zhi-Hui Li, Cai Meng +2
The China ADS (C-ADS) project is proposed to build a 1000 MW Accelerator Driven sub-critical System around 2032. The accelerator will work in CW mode with 10 mA in beam current and…