5 papers
RPC performance vs FE electoronics and detector parameters
R. Cardarelli, G. Aielli, E. Alunno Camelia +8
The first Resistive Plate Chambers detectors were developed for cosmic ray experiments, where low rate capability, good time resolution and low cost per unit of area were needed. T…
Development of gaseous particle detectors based on semiconductive plate electrodes
A. Rocchi, R. Cardarelli, G. Aielli +8
A new particle detector with sub-nanosecond time resolution capable of working in high-rate environment (rate capability of the order of ) is under developmnet. Semicond…
Design a TDC in SiGe for RPC's electronics Front-end for the use in a high-rate experiment
Salvatore Bruno, Roberto Cardarelli, Giulio Aielli +9
With the new generation of the RPC, it is possible to work with induced signals of hundreds , hence the front-end electronics is an important and delicate part of the detector…
Development of a new Front End electronics in Silicon and Silicon-Germanium technology for the Resistive Plate Chamber detector for high rate experiments
Luca Pizzimento, Roberto Cardarelli, Giulio Aielli +8
The upgrade of the Resistive Plate Chamber (RPC) detector, in order to increase the detector rate capability and to be able to work efficiently in high rate environment, consists i…
Optimization of RPCs read-out panel with electromagnetic simulation
E. Alunno Camelia, R. Cardarelli, A. Di Ciaccio +7
With the upgrade of the RPCs [1]-[2] and the increase of its performances, the study and the optimization of the read-out panel is necessary in order to maintain the signal integri…