25 citations · 105 across the 11 of their papers we have counts for
13 papers
The CMS Barrel Timing Layer: test beam confirmation of module timing performance
F. Addesa, P. Akrap, A. Albert +127
First of its kind, the barrel section of the MIP Timing Detector is a large area timing detector based on LYSO:Ce crystals and SiPMs which are required to operate in an unprecedent…
Optimization of LYSO crystals and SiPM parameters for the CMS MIP timing detector
F. Addesa, T. Anderson, P. Barria +68
For the High-Luminosity (HL-LHC) phase, the upgrade of the Compact Muon Solenoid (CMS) experiment at CERN will include a novel MIP Timing Detector (MTD). The central part of MTD, t…
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
M. Aamir, G. Adamov, T. Adams +568
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transv…
Timing Performance of the CMS High Granularity Calorimeter Prototype
CMS HGCAL collaboration
This paper describes the experience with the calibration, reconstruction and evaluation of the timing capabilities of the CMS HGCAL prototype in the beam tests in 2018. The calibra…
Integration of thermo-electric coolers into the CMS MTD SiPM arrays for operation under high neutron fluence
A. Bornheim, W. Lustermann, K. Stachon +27
The barrel section of the novel MIP Timing Detector (MTD) will be constructed as part of the upgrade of the CMS experiment to provide a time resolution for single charged tracks in…
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20300 GeV/c
B. Acar, G. Adamov, C. Adloff +454
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimete…
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
B. Acar, G. Adamov, C. Adloff +385
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a protot…
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
R. Abbott, A. Abreu, F. Addesa +196
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event re…
Construction and commissioning of CMS CE prototype silicon modules
B. Acar, G. Adamov, C. Adloff +327
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling cal…
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
B. Acar, G. Adamov, C. Adloff +327
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant wit…
Dose rate effects in the radiation damage of the plastic scintillators of the CMS Hadron Endcap Calorimeter
HCAL collaboration
We present measurements of the reduction of light output by plastic scintillators irradiated in the CMS detector during the 8 TeV run of the Large Hadron Collider and show that the…
Quartz Capillary Cladding Anthracene and Polycyclic Aromatic Hydrocarbon(PAH)-Core Scintillating/WLS Fibers for High Rates and Radiation Damage Resistance
A. Albayrak-Yetkin, B. Bilki, J. Corso +7
Quartz capillary tube/fibers have been filled with anthracene by a melt and vacuum inbibition process to fabricate a scintillating core fiber. Other polcyclic aromatic hydrocarbons…
Secondary Emission Calorimetry: Fast and Radiation-Hard
A. Albayrak-Yetkin, B. Bilki, J. Corso +10
A novel calorimeter sensor for electron, photon and hadron energy measurement based on Secondary Emission(SE) to measure ionization is described, using sheet-dynodes directly as th…