activity
20052025
most citedThe Upgraded D0 Detector

611 citations · 999 across the 21 of their papers we have counts for

collaborators

25 papers

physics.acc-ph2025

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

M. Benedikt, F. Zimmermann, B. Auchmann +1461

In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration ho…

physics.acc-ph2025★ 3 cited

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

M. Benedikt, F. Zimmermann, B. Auchmann +1461

Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability asp…

hep-ex2025★ 24 cited

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

M. Benedikt, F. Zimmermann, B. Auchmann +1461

Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume o…

physics.ins-det2025

On the resolution of dual readout calorimeters

S. Eno, L. Wu, M. Y. Aamir +3

Dual readout calorimeters allow state-of-the-art resolutions for hadronic energy measurements. Their various incarnations are leading candidates for the calorimeter systems for fut…

physics.ins-det2024★ 3 cited

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

M. Aamir, G. Adamov, T. Adams +568

A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transv…

physics.ins-det2023★ 4 cited

Timing Performance of the CMS High Granularity Calorimeter Prototype

CMS HGCAL collaboration

This paper describes the experience with the calibration, reconstruction and evaluation of the timing capabilities of the CMS HGCAL prototype in the beam tests in 2018. The calibra…

physics.ins-det2023★ 1 cited

Geant4 simulations of sampling and homogeneous hadronic calorimeters with dual readout for future colliders

S. V. Chekanov, S. Eno, S. Magill +2

Hadronic calorimeters with dual readout measure both scintillation and Cherenkov lights produced in their active media. They offer improvements in energy resolution and, therefore,…

physics.ins-det2023★ 2 cited

Reduction of light output of plastic scintillator tiles during irradiation at cold temperatures and in low-oxygen environments

B. Kronheim, A. Belloni, T. K. Edberg +6

The advent of the silicon photomultiplier has allowed the development of highly segmented calorimeters using plastic scintillator as the active media, with photodetectors embedded…

hep-ex2023

Detector R&D needs for the next generation collider

A. Apresyan, M. Artuso, J. Brau +25

The 2021 Snowmass Energy Frontier panel wrote in its final report "The realization of a Higgs factory will require an immediate, vigorous and targeted detector R&D program". Both l…

physics.ins-det2022

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20300 GeV/c

B. Acar, G. Adamov, C. Adloff +454

The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimete…

physics.ins-det2022

Precision timing for collider-experiment-based calorimetry

S. V. Chekanov, F. Simon, V. Boudry +18

In this White Paper for the 2021 Snowmass process, we discuss aspects of precision timing within electromagnetic and hadronic calorimeter systems for high-energy physics collider e…

hep-ex2022★ 23 cited

The Future Circular Collider: a Summary for the US 2021 Snowmass Process

G. Bernardi, E. Brost, D. Denisov +41

In this white paper for the 2021 Snowmass process, we give a description of the proposed Future Circular Collider (FCC) project and its physics program. The paper summarizes and up…

hep-ex2022

Enabling U.S. participation in Future Higgs Factories

K. Black, K. Bloom, J. E. Brau +11

Exciting proposals for a new Higgs factory collider, aimed at the search for new physics and precision studies of particles and forces, especially measurement of the Higgs boson co…

physics.ins-det2022

Dual-Readout Calorimetry for Future Experiments Probing Fundamental Physics

I. Pezzotti, Harvey Newman, J. Freeman +22

In this White Paper for the 2021 Snowmass process, we detail the status and prospects for dual-readout calorimetry. While all calorimeters allow estimation of energy depositions in…

physics.ins-det2021★ 19 cited

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

B. Acar, G. Adamov, C. Adloff +385

The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a protot…

physics.ins-det2021★ 10 cited

Test Beam Study of SiPM-on-Tile Configurations

A. Belloni, Y. M. Chen, A. Dyshkant +12

Light yield and spatial uniformity for a large variety of configurations of scintillator tiles was studied. The light from each scintillator was collected by a Silicon Photomultipl…

physics.ins-det2020

Construction and commissioning of CMS CE prototype silicon modules

B. Acar, G. Adamov, C. Adloff +327

As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling cal…

physics.ins-det2020★ 10 cited

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

B. Acar, G. Adamov, C. Adloff +327

The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant wit…

physics.ins-det2018

The DUNE Far Detector Interim Design Report, Volume 2: Single-Phase Module

DUNE Collaboration, B. Abi, R. Acciarri +1092

The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended a…

physics.ins-det2016★ 25 cited

Dose rate effects in the radiation damage of the plastic scintillators of the CMS Hadron Endcap Calorimeter

HCAL collaboration

We present measurements of the reduction of light output by plastic scintillators irradiated in the CMS detector during the 8 TeV run of the Large Hadron Collider and show that the…

hep-ex2013★ 35 cited

Measurement of the boson mass with the D0 detector

D0 Collaboration

We give a detailed description of the measurement of the boson mass, , performed on an integrated luminosity of 4.3 fb, which is based on similar techniques as used…

hep-ex2010★ 105 cited

b-Jet Identification in the D0 Experiment

The D0 Collaboration, V. Abazov

Algorithms distinguishing jets originating from b quarks from other jet flavors are important tools in the physics program of the D0 experiment at the Fermilab Tevatron p-pbar coll…

hep-ex2009★ 48 cited

Measurement of photon+b+X and photon+c+X production cross sections in ppbar collisions at sqrt(s)=1.96 TeV

D0 Collaboration, V. M. Abazov

First measurements of the differential cross sections for the inclusive production of a photon in association with a heavy quark (c, b) jet are presented, covering photon transvers…

hep-ex2007★ 76 cited

Observation and properties of the orbitally excited B_{s2}* Meson

D0 Collaboration, V. Abazov et al

We report the direct observation of the excited L=1 state B_{s2}* in fully reconstructed decays to B+K-. The mass of the B_{s2}* meson is measured to be {5839.6 +- 1.1 (stat.) +- 0…