activity
19992026
most citedCombined measurements of Higgs boson couplings in proton-proton collisions at 13 TeV

442 citations · 11k across the 409 of their papers we have counts for

collaborators
Showing physics.ins-detShow all

37 papers · 1 filter

physics.ins-det2025★ 5 cited

Performance of heavy-flavour jet identification in Lorentz-boosted topologies in proton-proton collisions at = 13 TeV

CMS Collaboration

Measurements in the highly Lorentz-boosted regime provoke increased interest in probing the Higgs boson properties and in searching for particles beyond the standard model at the L…

physics.ins-det2025★ 1 cited

Operation and performance of the CMS silicon strip tracker with proton-proton collisions at the CERN LHC

CMS Collaboration

Salient aspects of the commissioning, calibration, and performance of the CMS silicon strip tracker are discussed, drawing on experience during operation with proton-proton collisi…

physics.ins-det2025

The T-SDHCAL Hadronic Calorimeter for a Future Higgs factory

M. Tytgat, C. Combaret, C. Devanne +12

The CALICE technological RPC-based SDHCAL prototype that fullfils all the requirements of compactness, hermeticity and power budget of the future lepton accelerator experiments, ha…

physics.ins-det2024★ 42 cited

Performance of the CMS high-level trigger during LHC Run 2

CMS Collaboration

The CERN LHC provided proton and heavy ion collisions during its Run 2 operation period from 2015 to 2018. Proton-proton collisions reached a peak instantaneous luminosity of 2.1 $…

physics.ins-det2024★ 9 cited

Performance of the CMS electromagnetic calorimeter in pp collisions at = 13 TeV

CMS Collaboration

The operation and performance of the Compact Muon Solenoid (CMS) electromagnetic calorimeter (ECAL) are presented, based on data collected in pp collisions at = 13 TeV a…

physics.ins-det2024★ 6 cited

Portable acceleration of CMS computing workflows with coprocessors as a service

CMS Collaboration

Computing demands for large scientific experiments, such as the CMS experiment at the CERN LHC, will increase dramatically in the next decades. To complement the future performance…

physics.ins-det2023★ 1 cited

Development of the CMS detector for the CERN LHC Run 3

CMS Collaboration

Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for…

physics.ins-det2023★ 2 cited

Machine Learning based tool for CMS RPC currents quality monitoring

E. Shumka, A. Samalan, M. Tytgat +105

The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile…

physics.ins-det2022★ 1 cited

RPC based tracking system at CERN GIF++ facility

K. Mota Amarilo, A. Samalan, M. Tytgat +105

With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for s…

physics.ins-det2022

Design, Construction and Commissioning of a Technological Prototype of a Highly Granular SiPM-on-tile Scintillator-Steel Hadronic Calorimeter

CALICE Collaboration

The CALICE collaboration is developing highly granular electromagnetic and hadronic calorimeters for detectors at future energy frontier electron-positron colliders. After successf…

physics.ins-det2022★ 1 cited

Description and stability of a RPC-based calorimeter in electromagnetic and hadronic shower environments

D. Boumediene, V. Francais, J. Apostolakis +36

The CALICE Semi-Digital Hadron Calorimeter technological prototype completed in 2011 is a sampling calorimeter using Glass Resistive Plate Chamber (GRPC) detectors as the active me…

physics.ins-det2021★ 9 cited

Upgrade of the CMS Resistive Plate Chambers for the High Luminosity LHC

A. Samalan, M. Tytgat, G. A. Alves +108

During the upcoming High Luminosity phase of the Large Hadron Collider (HL-LHC), the integrated luminosity of the accelerator will increase to 3000 fb. The expected experime…

physics.ins-det2020

Effects of the electronic threshold on the performance of the RPC system of the CMS experiment

W. Elmetenawee

Resistive Plate Chambers have a very important role for muon triggering both in the barrel and in the endcap regions of the CMS experiment at the Large Hadron Collider (LHC). In or…

physics.ins-det2020★ 2 cited

Towards a two-dimensional readout of the improved CMS Resistive Plate Chamber with a new front-end electronics

Sabino Meola

As part of the Compact Muon Solenoid experiment Phase-II upgrade program, new Resistive Plate Chambers will be installed in the forward region. High background conditions are expec…

physics.ins-det2020★ 4 cited

Experiences from the RPC data taking during the CMS RUN-2

Mehar Ali Shah

The CMS experiment recorded 177.75 /fb of proton-proton collision data during the RUN-1 and RUN-2 data taking period. Successful data taking at increasing instantaneous luminositie…

physics.ins-det2020

CMS RPC Background -- Studies and Measurements

R. Hadjiiska, A. Samalan, M. Tytgat +106

The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used…

physics.ins-det2020★ 3 cited

Aging Study on Resistive Plate Chambers of the CMS Muon Detector for HL-LHC

R. Aly

In the High Luminosity Large Hadron Collider (HL-LHC) program, during the next years, the instantaneous luminosity will increase up to 5 10 cm s which…

physics.ins-det2020

Improved-RPC for the CMS muon system upgrade for the HL-LHC

Priyanka Kumari

During Phase-2 of the LHC, known as the High Luminosity LHC (HL-LHC), the accelerator will increase its instantaneous luminosity to 5 10 cm s, deliver…

physics.ins-det2020★ 5 cited

Particle Identification Using Boosted Decision Trees in the Semi-Digital Hadronic Calorimeter Prototype

D. Boumediene, A. Pingault, M. Tytgat +87

The CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) prototype using Glass Resistive Plate Chambers as a sensitive medium is the first technological prototype of a family of high-…

physics.ins-det2020

APRIL : a novel Algorithm for Particle Reconstruction at ILC

B. Li, R. Été, G. Grenier +1

The current developments for future electron-positron colliders are driven by the Particle Flow concept. In these developments, high granularity calorimeters play a central role. T…

physics.ins-det2018★ 20 cited

Precision measurement of the structure of the CMS inner tracking system using nuclear interactions

CMS Collaboration

The structure of the CMS inner tracking system has been studied using nuclear interactions of hadrons striking its material. Data from proton-proton collisions at a center-of-mass…

physics.ins-det2017★ 25 cited

Tracking within Hadronic Showers in the CALICE SDHCAL prototype using a Hough Transform Technique

The CALICE Collaboration

The high granularity of the CALICE Semi-Digital Hadronic CALorimeter (SDHCAL) provides the capability to reveal the track segments present in hadronic showers. These segments are t…

physics.ins-det2016★ 11 cited

High rate, fast timing Glass RPC for the high η CMS muon detectors

F. Lagarde, M. Gouzevitch, I. Laktineh +108

The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the ins…

physics.ins-det2016★ 9 cited

High rate, fast timing Glass RPC for the high CMS muon detectors

Maxime Gouzevitch, François Lagarde, Imad Laktineh +16

The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the ins…