568 citations · 739 across the 9 of their papers we have counts for
5 papers · 1 filter
Hot Isostatic Pressing (HIP) assisted diffusion bonding between CuCr1Zr and AISI 316L for application to the Super Proton Synchrotron (SPS) internal beam dump at CERN
Stefano Pianese, Antonio Perillo-Marcone, François-Xavier Nuiry +12
The new generation internal beam dump of the Super Proton Synchrotron (SPS) at CERN will have to dissipate approximately 270 kW of thermal power, deposited by the primary proton be…
Detector Technologies for CLIC
A. C. Abusleme Hoffman, G. Parès, T. Fritzsch +129
The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at…
Production and Integration of the ATLAS Insertable B-Layer
B. Abbott, J. Albert, F. Alberti +373
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, s…
Measurement of shower development and its Molière radius with a four-plane LumiCal test set-up
H. Abramowicz, A. Abusleme, K. Afanaciev +57
A prototype of a luminometer, designed for a future e+e- collider detector, and consisting at present of a four-plane module, was tested in the CERN PS accelerator T9 beam. The obj…
ECFA Detector R&D Panel, Review Report
The FCAL Collaboration, H. Abramowicz, A. Abusleme +68
Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low ang…