2k citations · 4.6k across the 61 of their papers we have counts for
17 papers · 1 filter
Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC
The CMS Electromagnetic Calorimeter Group
The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam te…
Development, Characterization, and Testing of a Bias Supply for SiPMs in the CMVD Experiment
Prajjalak Chattopadhyay, Mandar N. Saraf, Gobinda Majumder +2
To assess the viability of a shallow-depth neutrino detector, a Cosmic Muon Veto Detector (CMVD) is being constructed on top of the stack of Resistive Plate Chamber (RPC) detectors…
Test-Jig for production testing of RPC-DAQ modules in INO-ICAL Experiment
Yuvaraj Elangovan, Mandar Saraf, B. Satyanarayana +6
The INO-ICAL experiment consist of 28,800 RPCs each equipped with a Front-End FPGA-based Data Acquisition (RPC-DAQ) module for acquiring detector signals. Due to the large number o…
TCP/IP based Remote Firmware Upgradation for INO ICAL RPC-DAQ Modules
Yuvaraj Elangovan, Mandar Saraf, B. Satyanarayana +8
The INO ICAL (India-based Neutrino Observatory Iron Calorimeter) experiment is an upcoming mega-science project currently in the developmental stages. This initiative employs over…
Design and Implementation of a UDP-Based Command Interface for the INO ICAL Experiment
Yuvaraj Elangovan, Mandar Saraf, B. Satyanarayana +9
Efficient command interface is a critical requirement for experiments employing a large number of front-end DAQ modules and control servers. In the context of the INOICAL (India-ba…
NIOS II Soft-Core Processor and Ethernet Controller Solution for RPC-DAQ in INO ICAL
Yuvaraj Elangovan, Mandar Saraf, B. Satyanarayana +8
This paper introduces a high-performance Soft-Core Processor based data acquisition system designed for handling Resistive Plate Chambers (RPCs). The DAQ consist of FPGA-based hard…
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
M. Aamir, G. Adamov, T. Adams +568
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transv…
Simulation of RPC responses in mini-Iron Calorimeter for cosmic ray muon studies
J. M. John, G. Majumder, S. Pethuraj
A Prototype of the Iron Calorimeter for the India-based Neutrino Observatory is currently running in Madurai, India. This consists of twenty large area single gap Resistive Plate C…
Mass testing of SiPMs for the CMVD at IICHEP
Mamta Jangra, Raj Bhupen, Gobinda Majumder +14
A Cosmic Muon Veto Detector (CMVD) is being built around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India based Neutrino Observatory, Madurai. The…
Optimisation of Operating High Voltage of the large area Resistive Plate Chamber for ICAL experiment
S. Pethuraj, G. Majumder, K. C. Ravindran +2
The Resistive Plate Chamber is a widely used detector in high energy physics. The operating potential of this chamber is determined by the optimisation of the efficiency and noise…
Qualification study of SiPMs on a large scale for the CMVD Experiment
Mamta Jangra, Raj Bhupen, Gobinda Majumder +14
A Cosmic Muon Veto (CMV) detector using extruded plastic scintillators is being designed around the mini-Iron Calorimeter (mini-ICAL) detector at the transit campus of the India ba…
Improving Time and Position Resolution of RPC detectors using Time Over Threshold Information
Jim M John, S. Pethuraj, G. Majumder +3
INO-ICAL is a proposed underground particle physics experiment to study the neutrino oscillation parameters by detecting neutrinos produced in the atmospheric air showers. Iron CAL…
Development and characterization of six-gap glass MRPCs and feasibility study of a PET device
M. Nizam, B. Satyanarayana, R. R. Shinde +1
The Multigap Resistive Plate Chambers (MRPCs) provide excellent timing as well as position resolutions at relatively low cost. Therefore, they can be used in medical imaging applic…
Leak Test of Resistive Plate Chamber Gap by Monitoring Absolute Pressure
Suryanarayan Mondal, V. M. Datar, Gobinda Majumder +3
The India-based Neutrino Observatory Project (INO) is a proposed underground high energy physics experiment at Theni, India to study the neutrino oscillation parameters using atmos…
Simulation study of energy resolution, position resolution and - separation of a sampling electromagnetic calorimeter at high energies
Ashim Roy, Shilpi Jain, Sunanda Banerjee +2
A simulation study of energy resolution, position resolution, and - separation using multivariate methods of a sampling calorimeter is presented. As a realistic example, th…
Dose rate effects in the radiation damage of the plastic scintillators of the CMS Hadron Endcap Calorimeter
HCAL collaboration
We present measurements of the reduction of light output by plastic scintillators irradiated in the CMS detector during the 8 TeV run of the Large Hadron Collider and show that the…
Physics Potential of the ICAL detector at the India-based Neutrino Observatory (INO)
The ICAL Collaboration, Shakeel Ahmed, M. Sajjad Athar +89
The upcoming 50 kt magnetized iron calorimeter (ICAL) detector at the India-based Neutrino Observatory (INO) is designed to study the atmospheric neutrinos and antineutrinos separa…