40 citations · 181 across the 20 of their papers we have counts for
18 papers · 1 filter
Characterization of Aluminum Microwave SQUID Multiplexers for CENS Detection
James Amidei, Antoine Armatol, Corinne Augier +92
We present the design, fabrication, and characterization of an aluminum-based six-channel microwave SQUID multiplexer (MUX) prototype for transition-edge sensor (TES) readout in…
Neural Networks for 3D Characterisation of AGATA Crystals
Mojahed Abushawish, Guillaume Baulieu, Jérémie Dudouet +1
Precise localisation of gamma-ray interactions is crucial for the performance of the Advanced GAmma Tracking Array (AGATA). The Pulse Shape Analysis (PSA) method used for the posit…
Operation and performance of the CMS silicon strip tracker with proton-proton collisions at the CERN LHC
CMS Collaboration
Salient aspects of the commissioning, calibration, and performance of the CMS silicon strip tracker are discussed, drawing on experience during operation with proton-proton collisi…
Measurement of the fractional radiation length of a pixel module for the CMS Phase-2 upgrade via the multiple scattering of positrons
The Tracker Group of the CMS Collaboration
High-luminosity particle collider experiments such as the ones planned at the High-Luminosity Large Hadron Collider require ever-greater vertexing precision of the tracking detecto…
Beam Test Performance Studies of CMS Phase-2 Outer Tracker Module Prototypes
The Tracker Group of the CMS Collaboration
A new tracking detector will be installed as part of the Phase-2 upgrade of the CMS detector for the high-luminosity LHC era. This tracking detector includes the Inner Tracker, equ…
Development of the CMS detector for the CERN LHC Run 3
CMS Collaboration
Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for…
Evaluation of Planar Silicon Pixel Sensors with the RD53A Readout Chip for the Phase-2 Upgrade of the CMS Inner Tracker
The Tracker Group of the CMS Collaboration
The Large Hadron Collider (LHC) at CERN will undergo an upgrade in order to increase its luminosity to cms. The increased luminosity during this…
Results from a Prototype TES Detector for the Ricochet Experiment
Ricochet Collaboration, C. Augier, G. Baulieu +88
Coherent elastic neutrino-nucleus scattering (CENS) offers valuable sensitivity to physics beyond the Standard Model. The Ricochet experiment will use cryogenic solid-state dete…
AGATA: Advancements in Software Developments
O. Stézowski, J. Dudouet, A. Goasduff +23
Presently, gamma-ray tracking in germanium segmented detectors is realised by applying two advanced, complex algorithms. While they have already triggered an intensive R&D, they ar…
Test beam performance of a CBC3-based mini-module for the Phase-2 CMS Outer Tracker before and after neutron irradiation
The Tracker Group of the CMS Collaboration
The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5-7.5 cms. This High Luminosity upgr…
HEMT-based 1K front-end electronics for the heat and ionization Ge CryoCube of the future RICOCHET CENS experiment
G. Baulieu, J. Billard, G. Bres +20
The RICOCHET reactor neutrino observatory is planned to be installed at the Laue Langevin Institute (ILL) starting mid-2022. Its scientific goal is to perform a low-energy and high…
Precision measurement of the structure of the CMS inner tracking system using nuclear interactions
CMS Collaboration
The structure of the CMS inner tracking system has been studied using nuclear interactions of hadrons striking its material. Data from proton-proton collisions at a center-of-mass…
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
M. Dragicevic, M. Friedl, J. Hrubec +481
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detecto…
Construction and commissioning of a technological prototype of a high-granularity semi-digital hadronic calorimeter
G. Baulieu, M. Bedjidian, K. Belkadhi +43
A large prototype of 1.3m3 was designed and built as a demonstrator of the semi-digital hadronic calorimeter (SDHCAL) concept proposed for the future ILC experiments. The prototype…
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
C. Adloff, J. -J. Blaising, M. Chefdeville +210
The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and de…
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
CALICE Collaboration, K. Francis, J. Repond +191
A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 pl…
Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL
C. Adloff, J. -J. Blaising, M. Chefdeville +215
Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an collide…
Track segments in hadronic showers in a highly granular scintillator-steel hadron calorimeter
CALICE Collaboration, C. Adloff, J. -J. Blaising +205
We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find tr…