Thermal Deformation Reduction in High-Power Interferometry with Higher-Order Laser Modes

Abstract

Test-mass thermal noise is a limiting noise source for current and next-generation ground-based gravitational-wave observatories. Uniform-intensity higher-order laser beams, including Laguerre-Gaussian (LG) and Hermite-Gaussian (HG) modes, have been proposed as alternatives to the fundamental Gaussian beam due to their thermal-noise advantages. As interferometer power increases toward the megawatt regime, thermal aberrations from absorption in the test-mass coatings become increasingly significant. In this work, we quantify the robustness of higher-order modes against absorption-induced thermal deformation. We show that, under identical operating conditions, higher-order modes produce substantially more uniform thermal distortions than the fundamental mode, requiring significantly less thermal compensation power. The optimal curvature correction is reduced to 33% for the LG${}_{2,2}$ mode and 24% for the HG${}_{3,3}$ mode relative to the fundamental mode. We further show that the residual thermal deformation of higher-order modes results in lower optical loss, larger cavity power buildup, and improved modal purity in an aLIGO-like cavity. In addition, astigmatism compensation further enhances the intracavity purity of HG modes under self-heating-induced deformation. These results demonstrate that higher-order modes not only mitigate thermal noise but also intrinsically reduce beam self-heating effects, making them promising candidates for future high-power gravitational-wave interferometers.

14 pages, 9 figures

References in corpus (19)

• Advanced Virgo: a 2nd generation interferometric gravitational wave detector
• Optical clock intercomparison with $6\times 10^{-19}$ precision in one hour
• A Cryogenic Silicon Interferometer for Gravitational-wave Detection
• Object Identification Using Correlated Orbital Angular Momentum States
• Advanced LIGO detector performance in the fourth observing run
• Higher-order Laguerre-Gauss mode generation and interferometry for gravitational wave detectors
• Overview of Advanced LIGO Adaptive Optics
• Low mechanical loss TiO${}_2$:GeO${}_2$ coatings for reduced thermal noise in Gravitational Wave Interferometers
• Searching for dark matter with an unequal delay interferometer
• LIGOs Quantum Response to Squeezed States
• Higher order Laguerre-Gauss mode degeneracy in realistic, high finesse cavities
• Point absorbers in Advanced LIGO
• Experimental demonstration of higher-order Laguerre-Gauss mode interferometry
• Generation of very high-order high purity Gaussian modes via spatial light modulation
• Higher-order Hermite-Gauss modes as a robust flat beam in interferometric gravitational wave detectors
• Experimental demonstrations of alignment and mode matching in optical cavities with higher-order Hermite-Gauss modes
• Thermal modelling of Advanced LIGO test masses
• Misalignment and mode mismatch error signals for higher-order Hermite-Gauss modes from two sensing schemes
• Demonstration of a next-generation wavefront actuator for gravitational-wave detection