Non-demolition fluorescence readout and high-fidelity unconditional reset of a fluxonium qubit via dissipation engineering
arXiv:2504.15901 · doi:10.1103/gcgj-srgy
Abstract
Non-demolition readout and high-fidelity unconditional reset of qubits are key requirements for practical quantum computation. For superconducting qubits, readout and reset are typically realized using resonators based on dispersive approximation. However, violations of the approximation often lead to detrimental effects on the qubit. In this work, we demonstrate non-demolition fluorescence readout and high-fidelity unconditional reset of a fluxonium qubit via dissipation engineering without employing a resonator. We design and implement a planar filter to protect the qubit from energy relaxation while enhancing the relaxation of the readout transition. By appropriately selecting the readout transition, we achieve fluorescence readout with enhanced quantum non-demolitionness. We also realize fast, high-fidelity and all-microwave unconditional reset of the fluxonium qubit. These results highlight the potential of superconducting-quantum computing architectures without relying on dispersive interaction between qubits and resonators.
arXiv comment11 pages, 8 figures
References in corpus (51)
- Supplementary information for "Quantum supremacy using a programmable superconducting processor"
- Charge insensitive qubit design derived from the Cooper pair box
- Cavity quantum electrodynamics for superconducting electrical circuits: an architecture for quantum computation
- Coherent control of macroscopic quantum states in a single-Cooper-pair box
- Circuit Quantum Electrodynamics
- Superconducting Qubits: Current State of Play
- Fluxonium: single Cooper pair circuit free of charge offsets
- Quantum error correction below the surface code threshold
- The Flux Qubit Revisited to Enhance Coherence and Reproducibility
- The Future of Quantum Computing with Superconducting Qubits
- Realizing Rapid, High-Fidelity, Single-Shot Dispersive Readout of Superconducting Qubits
- Realization of high-fidelity CZ and ZZ-free iSWAP gates with a tunable coupler
- Nonequilibrium quasiparticles and periodicity in single-Cooper-pair transistors
- Hot non-equilibrium quasiparticles in transmon qubits
- Fast and Unconditional All-Microwave Reset of a Superconducting Qubit
- Measurement-induced state transitions in a superconducting qubit: Beyond the rotating wave approximation
- Quasiparticle relaxation of superconducting qubits in the presence of flux
- Fluxonium: an alternative qubit platform for high-fidelity operations
- Non-Poissonian Quantum Jumps of a Fluxonium Qubit due to Quasiparticle Excitations
- Fast readout and reset of a superconducting qubit coupled to a resonator with an intrinsic Purcell filter
- High-Fidelity, Frequency-Flexible Two-Qubit Fluxonium Gates with a Transmon Coupler
- Universal fast flux control of a coherent, low-frequency qubit
- High fidelity two-qubit gates on fluxoniums using a tunable coupler
- Moving beyond the transmon: Noise-protected superconducting quantum circuits
- Dynamics of Transmon Ionization
- Reducing quantum-regime dielectric loss of silicon nitride for superconducting quantum circuits
- Improving the Quality Factor of Microwave Compact Resonators by Optimizing their Geometrical Parameters
- Time-domain characterization and correction of on-chip distortion of control pulses in a quantum processor
- Scalable High-Performance Fluxonium Quantum Processor
- Measurement-Induced State Transitions in a Superconducting Qubit: Within the Rotating Wave Approximation
- Bifluxon: Fluxon-Parity-Protected Superconducting Qubit
- Fast logic with slow qubits: microwave-activated controlled-Z gate on low-frequency fluxoniums
- Measurement-Induced Transmon Ionization
- Coexistence of nonequilibrium density and equilibrium energy distribution of quasiparticles in a superconducting qubit
- Enhancing Dispersive Readout of Superconducting Qubits Through Dynamic Control of the Dispersive Shift: Experiment and Theory
- Resisting high-energy impact events through gap engineering in superconducting qubit arrays
- Quantum non-demolition dispersive readout of a superconducting artificial atom using large photon numbers
- Realization of High-Fidelity CZ Gate based on a Double-Transmon Coupler
- Photon-noise-tolerant dispersive readout of a superconducting qubit using a nonlinear Purcell filter
- Simultaneous monitoring of fluxonium qubits in a waveguide
- Efficient initialization of fluxonium qubits based on auxiliary energy levels
- High coherence fluxonium manufactured with a wafer-scale uniformity process
- Characterization of low-temperature microwave loss of thin aluminum oxide formed by plasma oxidation
- Broadband Bandpass Purcell Filter for Circuit Quantum Electrodynamics
- Compact superconducting microwave resonators based on Al-AlOx-Al capacitor
- Measurement-induced state transitions in dispersive qubit readout schemes
- Enhanced Qubit Readout via Reinforcement Learning
- Flux-pulse-assisted Readout of a Fluxonium Qubit
- Characterization of Broadband Purcell Filters with Compact Footprint for Fast Multiplexed Superconducting Qubit Readout
- Verifying the analogy between transversely coupled spin-1/2 systems and inductively-coupled fluxoniums
- Control and readout of a transmon using a compact superconducting resonator