A practical guide to feedback control for Pound-Drever-Hall laser linewidth narrowing

Abstract

The Pound-Drever-Hall (PDH) technique for laser linewidth narrowing is widely used by AMO experimentalists. However, achieving a high-performance PDH locking requires substantial engineering experience, which is scattered across literature and often lacks a cohesive control-theory perspective. Excellent pedagogical papers exist on the theory of the PDH error signal but they rarely cover feedback control. General-purpose control theory literature seldom discuss PDH laser locking specifically. Although excellent PDH review articles provide thorough knowledge and practice on both aspects but they are not reader-friendly. We extend prior works by addressing component choice and loop tuning using modern tools like a vector network analyzer. We organize multifaceted engineering considerations systematically, grounded in feedback control principles. Our target reader is researchers setting up a PDH laser lock for the first time; we eschew advanced topics like minimizing residual amplitude modulation (RAM). Our guidance is illustrated by step-by-step optimization of the lock for a 1650 nm ECDL.

15 pages, 10 figures

References in corpus (29)

• SciPy 1.0--Fundamental Algorithms for Scientific Computing in Python
• An atomic clock with $10^{-18}$ instability
• A sub-40 mHz linewidth laser based on a silicon single-crystal optical cavity
• 1.5 $\mu$m lasers with sub 10 mHz linewidth
• Optical clock intercomparison with $6\times 10^{-19}$ precision in one hour
• Making optical atomic clocks more stable with $10^{-16}$ level laser stabilization
• Compact, thermal-noise-limited optical cavity for diode laser stabilization at 1 x 10-15
• Sub-Hz line width diode lasers by stabilization to vibrationally and thermally compensated ULE Fabry-Perot cavities
• 8E-17 fractional laser frequency instability with a long room-temperature cavity
• A clock with $8\times 10^{-19}$ systematic uncertainty
• Frequency ratio of the ${}^{229\mathrm{m}}$Th nuclear isomeric transition and the ${}^{87}$Sr atomic clock
• An ultrastable silicon cavity in a continuously operating closed-cycle cryostat at 4 K
• Simple piezoelectric-actuated mirror with 180 kHz servo bandwidth
• Kramers-Kronig, Bode, and the meaning of zero
• An open and flexible digital phase-locked loop for optical metrology
• A transportable clock laser system with an instability of $1.6\times 10^{-16}$
• Compact embedded device for lock-in measurements and experiment active control
• Sub-hertz frequency stabilization of a commercial diode laser
• Linien: A versatile, user-friendly, open-source FPGA-based tool for frequency stabilization and spectroscopy parameter optimization
• Active cancellation of servo-induced noise on stabilized lasers via feedforward
• The performance and limitations of FPGA-based digital servos for atomic, molecular, and optical physics experiments
• Evaluation of a ${}^{88}$Sr${}^{+}$ optical clock with a direct measurement of the blackbody radiation shift and determination of the clock frequency
• Suppression of residual amplitude modulation effect in the Pound-Drever-Hall locking
• Active Cancellation of Acoustical Resonances with an FPGA FIR Filter
• A basic introduction to ultrastable optical cavities for laser stabilization
• Simple High-Bandwidth Sideband Locking with Heterodyne Readout
• Coherent Excitation of the 6S1/2 to 5D3/2 Electric Quadrupole Transition in 138Ba+
• Implementing an electronic sideband offset lock for precision spectroscopy in radium
• Ultra-low Frequency Noise External Cavity Diode Laser Systems for Quantum Applications

Cited by in corpus (2)

• Octave Spanning Visible to SWIR Integrated Coil-Stabilized Brillouin Lasers
• Errors in PDH offset locking due to spurious spectral features