An SNSPD-based detector system for NASA's Deep Space Optical Communications project
arXiv:2409.02356 · doi:10.1364/OE.541425
Abstract
We report on a free-space-coupled superconducting nanowire single-photon detector array developed for NASA's Deep Space Optical Communications project (DSOC). The array serves as the downlink detector for DSOC's primary ground receiver terminal located at Palomar Observatory's 200-inch Hale Telescope. The 64-pixel WSi array comprises four quadrants of 16 co-wound pixels covering a 320 micron diameter active area and embedded in an optical stack. The detector system also includes cryogenic optics for filtering and focusing the downlink signal and electronics for biasing the array and amplifying the output pulses. The detector system exhibits a peak system detection efficiency of 76% at 1550 nm, a background-limited false count rate as low as 3.7 kcps across the array, timing jitter less than 120 ps FWHM, and a maximum count rate of ~ 1 Gcps.
14 pages, 8 figures
References in corpus (9)
- Detecting Infrared Single Photons with Near-Unity System Detection Efficiency
- Detecting single infrared photons toward optimal system detection efficiency
- A superconducting-nanowire single-photon camera with 400,000 pixels
- Demonstration of stellar intensity interferometry with the four VERITAS telescopes
- GHz detection rates and dynamic photon-number resolution with superconducting nanowire arrays
- Large active-area superconducting microwire detector array with single-photon sensitivity in the near-infrared
- Time-walk and jitter correction in SNSPDs at high count rates
- Stellar intensity interferometry of Vega in photon counting mode
- Millimeter-scale active area superconducting microstrip single-photon detector fabricated by ultraviolet photolithography