Low-vibration cryogenic test facility for next generation of ground-based gravitational-wave observatories
arXiv:2408.10477 · doi:10.1063/5.0236965
Abstract
We present the design and commissioning of a cryogenic low-vibration test facility that measures displacement noise from a gram-scale silicon cantilever at the level of 10 at 1kHz. A volume of 36 litres is enclosed by radiation shields cooling an optical test cavity that is suspended from a multi-stage pendulum chain providing isolation from acoustic and environmental noise. This 3kg test cavity housing a crystalline silicon cantilever is radiatively cooled to 123K in 41 hours and held at that temperature over many months with a relative temperature stability of 1mK. The facility is capable of interferometrically measuring temperature-dependent broadband displacement noise between 50Hz and 10kHz where current and future ground-based gravitational wave observatories are most sensitive. With suitable cantilever design, the cryogenic facility we describe here will allow for the measurement of broadband thermal noise in crystalline silicon at 123K. This will guide the design of suspensions in planned future cryogenic ground-based gravitational-wave detectors such as LIGO Voyager and the Einstein Telescope. This facility is also suitable for the testing of new mirror coatings at cryogenic temperatures.
17 pages, 11 figures
References in corpus (12)
- Observation of Gravitational Waves from a Binary Black Hole Merger
- GW170817: Observation of Gravitational Waves from a Binary Neutron Star Inspiral
- Multi-messenger Observations of a Binary Neutron Star Merger
- GWTC-1: A Gravitational-Wave Transient Catalog of Compact Binary Mergers Observed by LIGO and Virgo during the First and Second Observing Runs
- Binary Black Hole Population Properties Inferred from the First and Second Observing Runs of Advanced LIGO and Advanced Virgo
- Open data from the third observing run of LIGO, Virgo, KAGRA and GEO
- Neutron Star Extreme Matter Observatory: A kilohertz-band gravitational-wave detector in the global network
- A Cryogenic Silicon Interferometer for Gravitational-wave Detection
- Mechanical Dissipation in Silicon Flexures
- Beyond the Second Generation of Laser-Interferometric Gravitational Wave Observatories
- Investigation of mechanical losses of thin silicon flexures at low temperatures
- On the mechanical quality factors of cryogenic test masses from fused silica and crystalline quartz