Estimated electric conductivities of thermal plasma for air-fuel combustion and oxy-fuel combustion with potassium or cesium seeding

Abstract

A complete model for estimating the electric conductivity of combustion product gases, with added cesium (Cs) or potassium (K) vapor for ionization, is presented. Neutral carrier gases serve as the bulk fluid that carries the seed material, as well as the electrons generated by the partial thermal (equilibrium) ionization of the seed alkali metal. The model accounts for electron-neutral scattering, as well as electron-ion and electron-electron scattering. The model is tested through comparison with published data. The model is aimed at being utilized for the plasma within magnetohydrodynamic (MHD) channels, where direct power extraction from passing electrically conducting plasma gas enables electric power generation. The thermal ionization model is then used to estimate the electric conductivity of seeded combustion gases under complete combustion of three selected fuels, namely: hydrogen (H2), methane (CH4), and carbon (C). For each of these three fuels, two options for the oxidizer were applied, namely: air (21 % molecular oxygen, 79 % molecular nitrogen by mole), and pure oxygen (oxy-combustion). Two types of seeds (with 1 % mole fraction, based on the composition before ionization) were also applied for each of the six combinations of (fuel-oxidizer), leading to a total of 12 different MHD plasma cases. For each of these cases, the electric conductivity was computed for a range of temperatures from 2000 K to 3000 K. The smallest estimated electric conductivity was 0.35 S/m for oxy-hydrogen combustion at 2000 K, with potassium seeding. The largest estimated electric conductivity was 180.30 S/m for oxy-carbon combustion at 3000 K, with cesium seeding. At 2000 K, replacing potassium with cesium causes a gain in the electric conductivity by a multiplicative gain factor of about 3.6 regardless of the fuel and oxidizer. This gain factor declines to between 1.77 and 2.07 at 3000 K.

28 pages, 16 figures, 14 tables

References in corpus (4)

• Pathways of organic micropollutants degradation in atmospheric pressure plasma processing
• Adiabatic Flame Temperatures for Oxy-Methane, Oxy-Hydrogen, Air-Methane, and Air-Hydrogen Stoichiometric Combustion using the NASA CEARUN Tool, GRI-Mech 3.0 Reaction Mechanism, and Cantera Python Package
• Detailed and simplified plasma models in combined-cycle magnetohydrodynamic power systems
• Temperature Dependent Functions of the Electron Neutral Momentum Transfer Collision Cross Sections of Selected Combustion Plasma Species

Cited by in corpus (7)

• Hydrogen Utilization as a Plasma Source for Magnetohydrodynamic Direct Power Extraction (MHD-DPE)
• Wind Speed Weibull Model Identification in Oman, and Computed Normalized Annual Energy Production (NAEP) From Wind Turbines Based on Data From Weather Stations
• Computed emissivity of carbon dioxide, water vapor, and their mixtures for a wide range of temperatures and pressure-pathlengths
• InvSim algorithm for pre-computing airplane flight controls in limited-range autonomous missions, and demonstration via double-roll maneuver of Mirage III fighters
• Profiles of the Power Density and Other Properties of Hydrogen Magnetohydrodynamic Generators at Conditions
• OpenFOAM computational fluid dynamics (CFD) solver for magnetohydrodynamic open cycles, applied to the Sakhalin pulsed magnetohydrodynamic generator (PMHDG)
• Extended five-term nonlinear drag model for a wide range of cylinder wakes