Detailed and simplified plasma models in combined-cycle magnetohydrodynamic power systems

Abstract

Magnetohydrodynamics (MHD) is a subject concerned with the dynamics of electrically conducting fluids (plasma) and can be applied in electric power generation. As a unique technology for producing direct-current electricity without moving parts, it can be utilized within a high-temperature topping power cycle to be combined with a traditional bottoming power cycle, forming a combined-cycle MHD system. This study presents governing equations for the electric field and current density field within a moving plasma subject to an applied magnetic field. The modeling equations are described at four descending levels of complexity. Starting with the first level of modeling, which is the most general case, where no assumptions are made regarding the electric field, plasma velocity field, applied magnetic field, or electrode geometry. In the second level of modeling, the magnetic field is treated as one-dimensional. In the third level of modeling, a specific Faraday-type magnetohydrodynamics plasma generator channel is considered, having two continuous electrodes acting as parallel constant-voltage terminals. In the fourth (and simplest) level of modeling, an additional approximation is made by setting the Hall parameter to zero and replacing all vector fields with scalar quantities. For that simplest model, a representative set of operation conditions (electric conductivity 20 S/m, temperature 2800 K, supersonic plasma gas speed 2000 m/s with Mach 2.134, and magnetic flux density 5 T) shows that the optimum idealized electric power that can be extracted from a unit volume of plasma is estimated as 500 MW/m3. This is a much larger volumetric power density than typical values encountered in reciprocating piston-type engines (0.2 MW/m3) or rotary gas turbine engines (0.5 MW/m3). Such an extremely high power density enables very compact power generation units.

13 pages, 5 figures, journal paper

References in corpus (4)

• Assessment of Three Databases for the NASA Seven-Coefficient Polynomial Fits for Calculating Thermodynamic Properties of Individual Species
• Real time display with the ferrolens of homogeneous magnetic fields
• Multi-Physics Mathematical Model for Weakly-Ionized Plasma Flows
• Cantera-Based Python Computer Program for Solving Steam Power Cycles with Superheating

Cited by in corpus (9)

• Estimated electric conductivities of thermal plasma for air-fuel combustion and oxy-fuel combustion with potassium or cesium seeding
• Hydrogen Utilization as a Plasma Source for Magnetohydrodynamic Direct Power Extraction (MHD-DPE)
• Wind Speed Weibull Model Identification in Oman, and Computed Normalized Annual Energy Production (NAEP) From Wind Turbines Based on Data From Weather Stations
• Computed emissivity of carbon dioxide, water vapor, and their mixtures for a wide range of temperatures and pressure-pathlengths
• InvSim algorithm for pre-computing airplane flight controls in limited-range autonomous missions, and demonstration via double-roll maneuver of Mirage III fighters
• Detailed Derivation of the Scalar Explicit Expressions Governing the Electric Field, Current Density, and Volumetric Power Density in the Four Types of Linear Divergent MHD Channels Under a Unidirectional Applied Magnetic Field
• Profiles of the Power Density and Other Properties of Hydrogen Magnetohydrodynamic Generators at Conditions
• OpenFOAM computational fluid dynamics (CFD) solver for magnetohydrodynamic open cycles, applied to the Sakhalin pulsed magnetohydrodynamic generator (PMHDG)
• Extended five-term nonlinear drag model for a wide range of cylinder wakes