High-efficiency broadband fiber-to-chip coupler using a 3D nanoprinting microfiber

Abstract

We propose a method for coupling a tapered optical fiber to an inverted tapered SiN waveguide by fabricating a microfiber using 3D nanoprinting lithography. The microfiber consists of three parts: a tapered cladding cap, an S-bend, and a straight part, all composed of high-refractive-index material. Light is adiabatically coupled from the tapered fiber to the printed microfiber through the cladding cap. The light is then transmitted through the S-bend and the straight part with low loss and is finally coupled to the waveguide through the evanescent field. In the simulation, our design can achieve a high coupling efficiency (TE mode) of ~97% at a wavelength of 1542 nm with a wide bandwidth of ~768 nm at the 1-dB cut-off criterion.

arXiv comment14 pages, 8 figures

References in corpus (7)

• Integrated Photonic Quantum Technologies
• Breaking the Loss Limitation of On-chip High-confinement Resonators
• High Speed and High Efficiency Travelling Wave Single-Photon Detectors Embedded in Nanophotonic Circuits
• Hybrid integration of silicon photonics circuits and InP lasers by photonic wire bonding
• Highly efficient coupling from an optical fiber to a nanoscale silicon optomechanical cavity
• Quantum dot single-photon emission coupled into single-mode fibers with 3D printed micro-objectives
• Superconducting Nanowire Single-Photon Detector (SNSPD) with 3D-Printed Free-Form Microlenses