Superconducting Nanowire Single-Photon Detector (SNSPD) with 3D-Printed Free-Form Microlenses
arXiv:2104.09446 · doi:10.1364/OE.427639
Abstract
We present an approach to increase the effective light-receiving area of superconducting nanowire single-photon detectors (SNSPD) by means of free-form microlenses that are printed in situ on top of the sensitive detector area using high-resolution multi-photon lithography. We demonstrate a detector based on a niobium-nitride (NbN) nanowire with a 4.5 m 4.5 m sensitive area, supplemented with a lens of 60 m diameter. For free-space illumination at a wavelength of 1550 nm, the lensed sensor has a 100-fold-increased effective collection area, which leads to strongly enhanced system detection efficiency without the need for long nanowires. Our approach can be readily applied to a wide range of sensor types and effectively overcomes the inherent design conflict between high counting speed due to short sensor reset time, high timing accuracy, and high fabrication yield on the one hand and high collection efficiency through large effective detection areas on the other hand.
arXiv comment25 pages, 6 figures
References in corpus (18)
- High Speed and High Efficiency Travelling Wave Single-Photon Detectors Embedded in Nanophotonic Circuits
- High rate, long-distance quantum key distribution over 250km of ultra low loss fibres
- Hybrid integration of silicon photonics circuits and InP lasers by photonic wire bonding
- Geometry-dependent critical currents in superconducting nanocircuits
- Detecting Dark Matter with Superconducting Nanowires
- A kilopixel array of superconducting nanowire single-photon detectors
- Broadband on-chip single-photon spectrometer
- Superconducting nanowire detector jitters limited by detector geometry
- NbTiN superconducting nanowire detectors for visible and telecom wavelengths single photon counting on Si3N4 photonic circuits
- Superconducting nanowire single photon detector at 532 nm and demonstration in satellite laser ranging
- Multi-channel SNSPD system with high detection efficiency at telecommunication wavelength
- Fully on-chip single-photon Hanbury-Brown and Twiss experiment on a monolithic semiconductor-superconductor platform
- Superconducting single photon detectors integrated with diamond nanophotonic circuits
- Fano fluctuations in superconducting nanowire single-photon detectors
- Enhancing intrinsic detection efficiency of superconducting nanowire single-photon detectors via helium ion irradiation
- Quantum dot single-photon emission coupled into single-mode fibers with 3D printed micro-objectives
- Enhancement of superconductivity in NbN nanowires by negative electron-beam lithography with positive resist
- Self-aligned multi-channel superconducting nanowire avalanche photodetector
Cited by in corpus (4)
- 3D-printed facet-attached optical elements for connecting VCSEL and photodiodes to fiber arrays and multi-core fibers
- Ultra-broadband polarization beam splitter and rotator based on 3D-printed waveguides
- 3D-printed facet-attached optical elements for beam shaping in optical phased arrays
- High-efficiency broadband fiber-to-chip coupler using a 3D nanoprinting microfiber