Anisotropic Thermoreflectance Thermometry: A contactless frequency-domain approach to study anisotropic thermal transport
arXiv:2109.00763 · doi:10.1063/5.0066166
Abstract
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as used in the 3-omega method, however, keeping all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determine all the elements of the thermal conductivity tensor, which is experimentally achieved by simply rotating the sample with respect to the line-shaped optical heater. We provide the mathematical solution of the heat equation for the cases of anisotropic substrates, multilayers, as well as thin films. This methodology allows an accurate determination of the thermal conductivity, and does not require complex modeling or intensive computational efforts to process the experimental data, i.e., the thermal conductivity is obtained through a simple linear fit ("slope method"), in a similar fashion as in the 3-omega method. We demonstrate the potential of this approach by studying isotropic and anisotropic materials in a wide range of thermal conductivities. In particular, we have studied the following inorganic and organic systems: (i) glass, Si, and Ge substrates (isotropic), (ii) -GaO, and a Kapton substrate (anisotropic) and , (iii) a 285 nm SiO/Si thin film. The accuracy in the determination of the thermal conductivity is estimated at 5\%, whereas the best temperature resolution is T 3 mK.
arXiv comment9 pages, 6 figures
References in corpus (9)
- Phononics: Manipulating heat flow with electronic analogs and beyond
- Transforming heat transfer with thermal metamaterials and devices
- 3 omega method for specific heat and thermal conductivity measurements
- Anisotropic Thermal Conductivity of Exfoliated Black Phosphorus
- Time-domain thermoreflectance (TDTR) measurements of anisotropic thermal conductivity using a variable spot size approach
- Dislocation-induced thermal transport anisotropy in single-crystal group-III nitride films
- A new elliptical-beam method based on time-domain thermoreflectance (TDTR) to measure the in-plane anisotropic thermal conductivity and its comparison with the beam-offset method
- Anisotropic thermal conductivity measurement using a new Asymmetric-Beam Time-Domain Thermoreflectance (AB-TDTR) method
- Thermal Anisotropy Enhanced by Phonon Size Effects in Nanoporous Materials