High resolution MCP-PMT Readout Using Transmission Lines
arXiv:2108.03406 · doi:10.1016/j.nima.2021.166092
Abstract
We study the potential of the MCP-PMT read-out to detect single photo-electron using transmission lines. Such a solution limits the number of read-out channels, has a uniform time resolution across the PMT surface and provides quasi-continuous measurement of the spatial coordinates. The proposed solution is designed to be used in the BOLD-PET project aiming to develop an innovative detection module for the positron emission tomography using the liquid detection media, the tri-methyl bismuth. In this study we use the commercial MCP-PMT Planacon from Photonis, with 32x32 anode structure. The PCB gathers signals from anode pads in 32 transmission lines which are read-out from both ends. Amplifier boards and SAMPIC modules, developed in our labs, allow us to realize the cost-effective, multi-channel digitization of signals with excellent precision. For a single photo-electron, we measured a time resolution of 70~ps (FWHM) simultaneously with a spatial accuracy of 1.6~mm and 0.9~mm (FWHM) along and across transmission lines correspondingly.
arXiv commentAccepted by Nuclear Instruments and Methods in Physics Research Section A
References in corpus (6)
- Measurements of timing resolution of ultra-fast silicon detectors with the SAMPIC waveform digitizer
- Testbeam studies of a TORCH prototype detector
- Design study of a scintronic crystal targeting tens of picoseconds time resolution for gamma ray imaging: the ClearMind detector
- Capacitively coupled pickup in MCP-based photodetectors using a conductive metallic anode
- Fast and Efficient Detection of 511 keV Photons using Cherenkov Light in PbF Crystal coupled to a MCP-PMT and SAMPIC Digitization Module
- Technical Design Report for the PANDA Endcap Disc DIRC